Ultimate Guide: 100 105 icnd1

Examcollection offers free demo for 100 105 exam exam. "ICND1 Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)", also known as cisco 100 105 pdf exam, is a Cisco Certification. This set of posts, Passing the Cisco 105 100 exam, will help you answer those questions. The icnd 100 105 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco ccent 100 105 pdf exams and revised by experts!

P.S. 100% Correct 100-105 testing software are available on Google Drive, GET MORE: https://drive.google.com/open?id=1WlO4jKMcUw7Pc24ub33sbsWsp9zlyfH9


New Cisco 100-105 Exam Dumps Collection (Question 6 - Question 15)

Q1. Given an IP address of 192.168.1.42 255.255.255.248, what is the subnet address?

A. 192.168.1.8/29

B. 192.168.1.32/27

C. 192.168.1.40/29

D. 192.168.1.16/28

E. 192.168.1.48/29

Answer: C

Explanation:

248 mask uses 5 bits (1111 1000)

42 IP in binary is (0010 1010)

The base subnet therefore is the lowest binary value that can be written without changing the output of an AND operation of the subnet mask and IP...

1111 1000 AND

0010 1010 equals

0010 1000 - which is .40

/24 is standard class C mask.

Adding the 5 bits from the .248 mask gives /29


Q2. Which statement describes the process ID that is used to run OSPF on a router?

A. It is globally significant and is used to represent the AS number.

B. It is locally significant and is used to identify an instance of the OSPF database.

C. It is globally significant and is used to identify OSPF stub areas.

D. It is locally significant and must be the same throughout an area.

Answer: B

Explanation:

The Process ID for OSPF on a router is only locally significant and you can use the same number on each router, or each router can have a different number-it just doesn't matter. The numbers you can use are from 1 to 65,535. Don't get this confused with area numbers, which can be from 0 to 4.2 billion.


Q3. Refer to the exhibit.

The DHCP settings have recently been changed on the DHCP server and the client is no longer able to reach network resources. What should be done to correct this situation?

A. Verify that the DNS server address is correct in the DHCP pool.

B. Ping the default gateway to populate the ARP cache.

C. Use the tracert command on the DHCP client to first determine where the problem is located.

D. Clear all DHCP leases on the router to prevent address conflicts.

E. Issue the ipconfig command with the /release and /renew options in a command window.

Answer: E

Explanation:

A PC will retain its DHCP assigned IP address until the lease time expires, which often times is 24 hours or more. When changes are made to the DHCP server, the client should issue the ipconfig/release and then ipconfig/renew commands to obtain a new IP address lease.


Q4. After the network has converged, what type of messaging, if any, occurs between R3 and R4?

A. No messages are exchanged

B. Hellos are sent every 10 seconds.

C. The full database from each router is sent every 30 seconds.

D. The routing table from each router is sent every 60 seconds.

Answer: B

Explanation:

HELLO messages are used to maintain adjacent neighbors so even when the network is converged, hellos are still exchanged. On broadcast and point-to-point links, the default is 10 seconds, on NBMA the default is 30 seconds.

Although OSPF is a link-state protocol the full database from each router is sent every 30 minutes (not seconds) therefore, C and D are not correct.


Q5. Refer to the exhibit.

Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this router?

A. 10.1.1.2

B. 10.154.154.1

C. 172.16.5.1

D. 192.168.5.3

Answer: C

Explanation:

The highest IP address of all loopback interfaces will be chosen -> Loopback 0 will be chosen as the router ID.


Q6. Which transport layer protocol provides best-effort delivery service with no acknowledgment receipt required?

A. HTTP

B. IP

C. TCP

D. Telnet

E. UDP

Answer: E

Explanation:

UDP provides a connectionless datagram service that offers best-effort delivery, which means that UDP does not guarantee delivery or verify sequencing for any datagrams. A source host that needs reliable communication must use either TCP or a program that

provides its own sequencing and acknowledgment services.


Q7. Which IP addresses are valid for hosts belonging to the 10.1.160.0/20 subnet? (Choose three.)

A. 10.1.168.0

B. 10.1.176.1

C. 10.1.174.255

D. 10.1.160.255

E. 10.1.160.0

F. 10.1.175.255

Answer: A,C,D

Explanation:

All IP address in IP ranges between: 10.1.160.1 and 10.1.175.254 are valid as shown below

Address: 10.1.160.0 00001010.00000001.1010 0000.00000000

Netmask: 255.255.240.0 = 20 11111111.11111111.1111 0000.00000000

Wildcard: 0.0.15.255 00000000.00000000.0000 1111.11111111

Which implies that:

Network: 10.1.160.0/20 00001010.00000001.1010 0000.00000000

HostMin: 10.1.160.1 00001010.00000001.1010 0000.00000001

HostMax: 10.1.175.254 00001010.00000001.1010 1111.11111110

Broadcast: 10.1.175.255 00001010.00000001.1010 1111.11111111


Q8. What is the network address for the host with IP address 192.168.23.61/28?

A. 192.168.23.0

B. 192.168.23.32

C. 192.168.23.48

D. 192.168.23.56

E. 192.168.23.60

Answer: C

Explanation:

Convert bit-length prefix to quad-dotted decimal representation, then from it find the number of bits used for subnetting you can find previously calculated number of subnets by separating subnets each having value of last bit used for subnet masking Find that your IP address is in which subnet, that subnet's first address is network address and last address is broadcast address.

Based on above steps the answer is option C


Q9. Refer to the exhibit.

The host in Kiev sends a request for an HTML document to the server in Minsk. What will be the source IP address of the packet as it leaves the Kiev router?

A. 10.1.0.1

B. 10.1.0.5

C. 10.1.0.6

D. 10.1.0.14

E. 10.1.1.16

F. 10.1.2.8

Answer: E

Explanation:

Although the source and destination MAC address will change as a packet traverses a network, the source and destination IP address will not unless network address translation (NAT) is being done, which is not the case here.


Q10. Refer to the exhibit.

The network administrator is testing connectivity from the branch router to the newly installed application server. What is the most likely reason for the first ping having a success rate of only 60 percent?

A. The network is likely to be congested, with the result that packets are being intermittently dropped.

B. The branch router had to resolve the application server MAC address.

C. There is a short delay while NAT translates the server IP address.

D. A routing table lookup delayed forwarding on the first two ping packets.

E. The branch router LAN interface should be upgraded to FastEthernet.

Answer: B

Explanation:

Initially the MAC address had to be resolved, but once it is resolved and is in the ARP table of the router, pings go through immediately.


Recommend!! Get the 100% Correct 100-105 dumps in VCE and PDF From 2passeasy, Welcome to download: https://www.2passeasy.com/dumps/100-105/ (New 347 Q&As Version)