Actual 101-01 guidance Reviews & Tips
The article at Testaimer.com going over http://www.testaimer.com/101-01-test is very comprehensive.
Q11. If a file is not optimized for more than one user at a time, this indicates:
A. Steelhead appliance has entered admission control
B. Steelhead appliance is configured with the incorrect speed or duplex on the Primary interface
C. Steelhead appliance is configured with the incorrect speed or duplex on the in-path interfaces
D. Steelhead appliance is not able to acquire a "File Hold Key (FHK)"
E. Steelhead appliance is not able to acquire an "Opportunistic Lock (oplock)"
F. Steelhead appliance is not able to acquire a "Double Link (doulink)"
Q12. On a remote Steelhead appliance, what is the easiest way to tell what model of Steelhead appliance you are working with using the Management Console (GUI)?
A. On the Home page of the Steelhead appliance
B. Go to Configure > Optimization > General Service Settings
C. Use the "show module" CLI command
D. Go to Reports > Maintenance > System Info
E. Go to Configure > Configurations > Boot Order Info
Q13. Your company now considers WAN optimization crucial to the function of the business. Which of the following Riverbed Steelhead appliance features will provide hardware redundancy in case of failure? (Select 3)
A. Multi-core processors
B. Disk RAID
C. Multiple GB memory DIMMs
D. Hot-swappable disks
E. Multiple WAN/LAN network cards
Q14. Which of the following status states of the Steelhead appliance are valid? (Select 3)
Q15. When performing a logical in-path deployment, which interface needs to be physically cabled for optimization to occur?
Q16. How many slots are available in RSP?
Q17. After deployment of Steelhead appliances, a certain backup application shows poor bandwidth reduction. After disabling the backup application's native compression algorithm, the bandwidth reduction statistics on the Steelhead appliances suddenly improve significantly. Which of the following are likely causes for the increased bandwidth reduction?
A. The native compression algorithm of the backup application could not be compressed further
B. The application-level protocol used by the backup application is not recognized by the Steelhead appliances
C. The Steelhead appliances were not able to effectively perform TCP optimizations
D. There should be no difference between compressed and uncompressed traffic
Q18. Steelhead appliances increase. (Select 2)
A. Application performance
B. Data transfer speed over the WAN
C. Data transfer speed over the LAN
D. Quality of service
E. WORM stability
Q19. Which feature is highly recommended when deploying Steelhead Mobile?
A. Automatic peering (using enhanced auto-discovery) enabled on Steelhead appliances
B. Connectionforwarding(using port 7850 for neighbor relationships) on Steelhead appliances
C. Pass-through rules to minimize overlapping opens
D. Fixed-target rules directed to port 7850 of all branch office Steelhead appliances
Q20. If the Steelhead Mobile client optimization is being blocked by the client firewall, you must set which port on the client firewall to allow incoming traffic?