Top Up to the minute 1Y0-351 practice Reviews!

Act now and download your Citrix 1Y0-351 test today! Do not waste time for the worthless Citrix 1Y0-351 tutorials. Download Latest Citrix Citrix NetScaler 10.5 Essentials and Networking exam with real questions and answers and begin to learn Citrix 1Y0-351 with a classic professional.

Q81. When a network engineer logs onto a new NetScaler device in the London datacenter, data output indicates that the device is NOT configured for the local time. How can the network engineer synchronize the correct time with an NTP server in the local data center? 

A. Configure the correct time from the GUI and restart. 

B. Modify the ntp.conf and rc.netscaler files and restart. 

C. Logon using the nsrecover/nsroot credentials and restart. 

D. Configure the NetScaler as a secondary NTP server and restart. 


Q82. Scenario: When the NetScaler was set up, compression was enabled. The network engineer would like to disable compression ONLY for a particular virtual server. How could the engineer accomplish this? 

A. Uncheck Compression in the system basic features. 

B. Create a policy with a NOCOMPRESS action, bound to the global request point. 

C. Disable compression on the services or service groups bound to the virtual server. 

D. Create a policy with a NOCOMPRESS action, bound the virtual server Compression (request) point. 


Q83. What is the default load-balancing method? 

A. Round Robin 

B. Source IP Hash 

C. Least Connection 

D. Least Response Time 


Q84. Scenario: A NetScaler Engineer is configuring LACP (Link Aggregation Configuration Protocol) on the NetScaler. The engineer adds interface 10/3 and 10/4 to LA/1 (which already contains interfaces 10/1 and 10/2) and is configured for VLAN 500. VLAN 100 is bound to interface 10/3 and VLAN 200 is bound to interface 10/4. VLAN 500 is bound to channel LA/1. Which VLAN is shown with a "show interface" command for interface 10/3? 

A. 1 

B. 100 

C. 200 

D. 500 


Q85. A network engineer notes that a high availability pair (HA) is NOT synchronizing correctly and decides to open a ticket with Citrix Support. When opening the new ticket with Citrix Support, the engineer should run show and . (Choose the correct set of options to complete the sentence.) 

A. ha node; provide any public IP addresses listed 

B. ha node; provide the hello and dead interval data 

C. techsupport on the primary device; send the output to Citrix Support 

D. techsupport on both the primary and secondary devices; send the output to Citrix support 


Q86. Which two authentication types on the NetScaler support password changes? (Choose two.) 





Answer: B, C 

Q87. An engineer has two NetScaler devices in two different datacenters and wants to create a high availability (HA) pair with the two devices, even though they are on two different subnets. 

How can the engineer configure the HA Pair between the two NetScaler devices? 

A. Configure StaySecondary on the second datacenter appliance. 

B. Ensure that INC mode is enabled during the creation of the HA Pair. 

C. Enable the HAMonitors on all interfaces after the HA Pair has been created. 

D. Change the NSIP of the second appliance to be on the same subnet as the first appliance. 


Q88. Scenario: The NetScaler has connections to a large number of VPNs. The network engineer wants to minimize the number of ARP requests. Which feature should the network engineer enable to minimize ARP requests? 

A. TCP Buffering 

B. Use Source IP 

C. Edge Configuration 

D. MAC based forwarding 


Q89. A network engineer needs to configure Citrix NetScaler to provide Access Gateway services to VLAN 2 using interface 1/1 only, while also using interface 1/2 to provide load balancing services to VLAN 3. How could this result be achieved? 

A. Disable static route advertisement. 

B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1/1 Bind VLAN 3 to Interface 1/2 

C. Enable Layer 3 mode Create a Channel Interface using Interface 1/1 and 1/2 Create 2 VMACs Bind a VMAC to interface 1/1 and 1/2 

D. Configure policy-based routing using the Interface option as a filter. 


Q90. What is the key benefit to enabling Session Reuse on an SSL offload VServer? 

A. The number of HTTP requests to the backend services are decreased. 

B. Resumed SSL sessions are more secure than sessions that require renegotiation. 

C. Reusing existing sessions decreases the number of TCP connections made to backend services. 

D. A partial SSL handshake is sent over the existing SSL connection, reducing CPU and bandwidth usage.