A Review Of Highest Quality 1z0-1048 Vce

Our pass rate is high to 98.9% and the similarity percentage between our 1z0-1048 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Oracle 1z0-1048 exam in just one try? I am currently studying for the Oracle 1z0-1048 exam. Latest Oracle 1z0-1048 Test exam practice questions and answers, Try Oracle 1z0-1048 Brain Dumps First.

Free 1z0-1048 Demo Online For Oracle Certifitcation:

NEW QUESTION 1
When selecting delivered formula to use in defining a new template, if two delivered formula accomplish the same results, when must the formula with _AP be selected?

  • A. When the formula, template, and rule must access the time card data in an advanced sort order to complete correctly.
  • B. When the rule created with the formula/template must access data outside the current time card data.
  • C. Selecting the formula defined with _AP is not required.
  • D. When the formula, template, and rule must process first in the rule se
  • E. Formula identified with _AP enables additional processing order logic from within the Time and Labor rule processing engine.

Answer: B

NEW QUESTION 2
A customer requires Oracle payroll validation to run when a user goes from the time entry page to the time card review page, and for all payroll time types to be part of the transfer to payroll. Which two options should you use to configure this?

  • A. Use a time consumer set containing the delivered time category of “all payroll entries” and set “Validate on time card actions” to Next.
  • B. Use a time consumer set containing the delivered time category of “all payroll plus absence entries” and set “Validate on time card actions” to Next.
  • C. Use a time consumer set containing the delivered time category of “all payroll entries” and set “Validate on time card actions” to “Submit only.”
  • D. Use a time consumer set containing the delivered time category of “all payroll entries” and set “Validate on time card actions” to “Submit and save.”
  • E. Use a time consumer set containing the delivered time category of “all payroll plus absence entries” and set “Validate on time card actions” to “Submit and save.”

Answer: AD

NEW QUESTION 3
How should you define a new, single attribute time card field with a new data source for the Project Costing Task time attribute that is dependent on the Project Costing Project value selected?

  • A. Define the new time card field as an independent time card field using a properly defined table value set as the new data source.
  • B. Define the new time card filed as a dependent time card field, using the new data source with a properly defined table value set with the independent time card fields as the required Project Costing – Expenditure Type time attribute.
  • C. Define the new time card field by entering the correct parameters when running the Generate Time Card Fields process.
  • D. Only the delivered Project Costing Task time card field may be used in Cloud Time and Labor.
  • E. Define the new Task time card filed as a dependent time card filed using the new data source with a properly defined table value set, defined using the Dependent Field Definition page for the independent Project Costing – Projects Time Card Field.

Answer: E

NEW QUESTION 4
You have 10 different Legislative Data Groups (LDG) defined. Each LDG has a different set of Payroll Time Types and Absence Types.
How should you configure a Layout Component to display the proper values in one single list on the Time Entry Layout?

  • A. Create a Multiple Attribute Time Card Field, filtering the list using Assignment ID.
  • B. Create a Multiple Attribute Time Card field, filtering the displayed values based on the LDG Filtering function.
  • C. Create a Multiple Attribute Time Card Field, filtering the list using Element Eligibility.
  • D. Cannot be done in one lis
  • E. This requires two separate selection lists (Time Card fields), placed on the Time Entry Layout.

Answer: B

NEW QUESTION 5
Which two capabilities are defined for workers in the Time Entry Profiles in Time and Labor?

  • A. rules for time card actions that control when workers can enter, update, and delete their time
  • B. time card period
  • C. consumer set, validation, approval, and transfer processing
  • D. layouts for reporting time

Answer: AD

Explanation:
Reference https://docs.oracle.com/cd/E51367_01/globalop_gs/FAUTL/F1471298AN1531B.htm

NEW QUESTION 6
Your customer has asked you to define an overtime period that is different from the time card period and wants to display the overtime bar on the calendar page and in the time card matrix.
Which two solutions meet this requirement?

  • A. Enable the overtime option on the time categories to show overtime periods separately.
  • B. Create a repeating time period by selecting formula option to enable overtime periods separately.
  • C. Create a separate repeating time period by selecting overtime checkbox in period usage section.
  • D. Enable the highlight overtime periods option in the time entry properties section of time card matrix.
  • E. Create a repeating time period by selecting period type as overtime to enable overtime periods separately.

Answer: DE

NEW QUESTION 7
How do you configure a time submission rule set used with time devices?

  • A. Every time you create a time submission rule, the save action also creates a corresponding rule set.
  • B. Use the time device import process to add time submission rules to the rule set.
  • C. Every time you associate a time submission rule with the processing profile, the add action creates a corresponding rule set.
  • D. Manage Time Submission Rule Set and add the submission rules to the set.

Answer: C

Explanation:
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAITL/FAITL2021781.htm#FAITL1788995

NEW QUESTION 8
A rule used in the production environment is delivering incorrect results. It was determined that the formula and template were correct, but the rule input and output parameters were not set up with the correct values.
Which option describes, at a high level, how should you resolve the issue?

  • A. Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to “Yes”. Delete the incorrect rule from the rule se
  • B. From the Manage Time Repository Rules task, select the incorrect rule and select Actions – Edit Deployed Rul
  • C. Correct the input and output value
  • D. Re-add the corrected rule to the rule set using the appropriate edit option
  • E. Resubmit the incorrect time cards.
  • F. Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to “Yes”. Edit the deployedRule to correct the input and output value
  • G. Resubmit the incorrect time cards.
  • H. Delete the incorrect rule from the rule se
  • I. From the Manage Time Repository Rules task, select the incorrect rule and select Actions – Edit Deployed Rul
  • J. Correct the input and output value
  • K. Re-add the corrected rule to the rule set using the appropriate edit option
  • L. Resubmit the incorrect time cards.
  • M. Duplicate the incorrect Rule, and correct input and output values in the new rul
  • N. Update the rule set using the appropriate edit options to use the new rul
  • O. Resubmit the incorrect time cards.

Answer: A

NEW QUESTION 9
You want to enable a contingent worker to view, edit, and create time cards for all workers in your organization in the US.

  • A. You need to give the contingent worker the Data Role that has been created for US managers, the job role for Time and Labor Employee, and the Duty Role for Time Card Entry.
  • B. You need to give the contingent worker the Data Role that has been created for US workers, the job role for Contingent Worker Manager, and the Duty Role for Time Card Entry.
  • C. Contingent workers cannot be enabled to act as Time and Labor Managers.
  • D. You need to give the contingent worker the Data Role that has been created for US workers, the job role for Time and Labor Manager, and the Duty Role for Time Card Management.

Answer: D

NEW QUESTION 10
What is the correct sequence of steps that you should perform to set multiple time attributes for different user groups?

  • A. Configure the time attributes the rule to the TER Rule Set and then to the worker via the appropriate pro> Define a custom value set > Define the single-attribute time card field > Assign to a layout set > Assign to the time entry profile.
  • B. Configure the time attributes > Define the single-attribute time card field > Assign to the time entry profile.
  • C. Configure the time attributes > Define the multiple-attribute time card filed > Assign to the time entry profile.
  • D. Configure the time attributes > Define the multiple-attribute time card filed > Assign to a layout set > Assign to the time entry profile.

Answer: C

NEW QUESTION 11
Which is not a predefined approval task and task rule for payroll and project costing time entry approvals?

  • A. a Payroll Time Card Approval task that automatically approves the time card if the total hours for time entries is 40 hours or less.
  • B. a Project Time Card Approval task that routes time cards that contain time entries with a reported project, task, and expenditure type to the appropriate Project Manager
  • C. a Payroll Time Card Approval task that routes payroll time entries to the Line Manager if the total hours for a time card exceed 40 hours
  • D. a Payroll Time Card Approval task that automatically approves the time card unless it contains absences

Answer: D

Explanation:
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAUTL/FAUTL1471283.htm#FAUTL1471283

NEW QUESTION 12
The Workforce Management business process contains which shard components?

  • A. Repeating Time Periods, Time Repository, Data Dictionary
  • B. Repeating Time Periods, Time Repository, Time Attributes
  • C. Repeating Time Periods, Time Repository, Data Dictionary, Time Consumers
  • D. Repeating Time Periods, Time Repository, Time Attributes, Time Consumers

Answer: D

NEW QUESTION 13
Which two time entry configurations on the manage time entry layout components task do you have to complete to report and calculate earned compensatory time and take compensatory absences?

  • A. Create a multi-attribute time entry field that includes the time attributes Absence Management Type.The absence management type that decrements the employee’s earned compensatory time the compensatory absence.
  • B. Create a multi-attribute time entry field that includes the time attribute Compensatory Time Absence Pla
  • C. The compensatory time absence plan that increments the employee’s earned compensatory time.
  • D. Create a single attribute time card field that include the time attribute Absence Plan.
  • E. Create a multiple attribute time card for the payroll time type compensatory time earned, and another payroll time for compensatory time taken.

Answer: AB

NEW QUESTION 14
What determines the validation and approval of payroll time types for Fusion Payroll?

  • A. Use of the delivered payroll time attributes and payroll time card fields.
  • B. Assignment of the customer-defined Time and Labor – Time Entry Rules (TER).
  • C. Assignment of a properly defined payroll time consumer set.
  • D. Assignment of the delivered payroll layout set and time entry options.

Answer: A

NEW QUESTION 15
Your client wants to minimize the validation rules that execute against a time card and only under certain circumstances they want certain validation rules, if required, to display validation messages.
Which option will accomplish your customer’s goals?

  • A. Create a new validation formula/template and rule that accesses HCM data to only execute if certain HR data exists for the worker and processes the validation logic on the time entrie
  • B. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.
  • C. Place the validation rules in a rule set, assigning a properly formatted time category on the same rows in the rule se
  • D. Assign the rule set to the workers using an appropriate profile.
  • E. Create a new formula/template and rule that uses an input parameter to check for certain values defined in the rule using a time category input paramete
  • F. When present, complete execution of the rul
  • G. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.
  • H. Create a formula that incorporates program logic to check for certain time card entries and, when present, execute the validation rul
  • I. Create the new template and rul
  • J. Place the rule that uses the formula in a rule set and assign the rule set using an appropriate profile.

Answer: B

NEW QUESTION 16
Which option will not enhance the reusability of a Time Calculation Rule template when defining rules?

  • A. Rule Template Definition > Summation Level
  • B. Rule Template Outputs > User Defined Output Sources
  • C. Rule Template Definition > Time Card Events That Trigger Rule option
  • D. Rule Template Parameters > Formula Parameters types
  • E. Rule Template Definition > Reporting Level

Answer: B

NEW QUESTION 17
If a manager has gone on leave without delegating their time card approvals, how should an HR administrator delegate the approvals to another user in their absence?

  • A. If the HR Admin has SOA Admin privileges in Identity and Access Management (IAM), they can go to the worklist and look at Administrative Tasks View and delegate.
  • B. They will have to wait for the manager to return to process the required approvals.
  • C. If the HR Admin has SOA Admin privileges in Oracle Identity Manager (OIM), they can go to the worklist and look at Administrative Tasks View and delegate.
  • D. If the HR Admin has SOA Admin privileges in the Authorization Policy Manager (APM), they can go to the worklist and look at Administrative Tasks View and delegate.

Answer: A

NEW QUESTION 18
A customer defines work schedules by using both elapsed and time-based shifts. How should you configure the Time and Labor time entry layout so that it properly shows the scheduled absences on the time card?

  • A. The time entry layout must include start and stop times along with the hidden Absence Plan time attribute and the displayed absence values.
  • B. The time entry layout must be part of a layout set that is configured by using the Absence Management Time Consumer template.
  • C. The time entry layout must include start and stop times along with the required assignment, in addition to a time card field for the absence values.
  • D. Absence entries can be entered only by suing the Calendar Entry layout in the layout set.
  • E. The time entry layout must contain the delivered, but hidden Schedule time attributes time card field.

Answer: C

NEW QUESTION 19
When should you execute the Time and Labor – Generate Data Dictionary Time Attributes process if you are implementing only Oracle Project Costing?

  • A. Every day
  • B. When new projects and tasks are created for use in Time and Labor
  • C. Never; not required to run the Generate Data Dictionary Time Attributes process when implementing Oracle Project Costing
  • D. Always before accessing the Manage Time Entry Layout Components setup task
  • E. When implementing Time and Labor for the first time

Answer: B

Explanation:
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAITL/FAITL1657304.htm#FAITL1657304

NEW QUESTION 20
Your customer wants to define a new time card field. Which option includes the complete list of valid data sources?

  • A. PVO, Independent value set, dependent value set, table defined value set, subset value set
  • B. Independent value set
  • C. PVO, independent value set, table defined value set
  • D. PVO only

Answer: C

NEW QUESTION 21
A customer requirement is to use the first part (week) of a biweekly time card period for validation purposes. Which option outlines how this could be accomplished?

  • A. Create a new rule template using a delivered TER formul
  • B. Enable input parameters in the template to define the validation period and set summation period to “Time Card Level.” Create rules using the new rule template and assign them using a rule set.
  • C. Create a new TER formula and rule template
  • D. Define the validation period within the formul
  • E. Enable the summation level selection when defining the rule as an input parameter within the rule template
  • F. Create rules using the new rule templates and assign them using a rule se
  • G. Place the “Day Level” rules on Rows 1–7 for days 1–7 in the time card period, and the “Time Card Level” Rule in the 8th ro
  • H. Use the Processing Sequence to order the rules.
  • I. Create a new rule template using a delivered TER formul
  • J. Enable input parameters in the template to define the validation period and set the summation period to “Day Level.” Create rules using the new rule template and assign them using a rule set.
  • K. Create a new TER formula and rule templat
  • L. Define the validation period within the formul
  • M. Set the summation period to “Time Card Level” in the rule template and enable the input parameter
  • N. Create rules using the new rule template and assign them using a rule set.

Answer: B

NEW QUESTION 22
Which three capabilities are defined for workers in the Time Processing Profiles in Time and Labor?

  • A. rules for time card actions that control when workers can enter, update, and delete their time
  • B. time submission rule set
  • C. time card period
  • D. consumer set, validation, approval, and transfer processing
  • E. time entry and time calculation rule sets

Answer: ABD

NEW QUESTION 23
Managers need to highlight the overtime periods while reviewing their time cards. How should you configure this?

  • A. You use personalization to enable the option.
  • B. Select the Enable option to highlight overtime periods in the time review layout.
  • C. Select the Enable option to highlight overtime periods in the time entry layout.
  • D. No configuration needed

Answer: B

NEW QUESTION 24
On a Payroll Time Card, workers enter time against different cost codes, and the customer requires the time card to be routed to the manager of the appropriate cost center or centers.
Which option is correct?

  • A. Modify the delivered project’s approval to route the time card to each Cost Center Manager instead of each Project Manager.
  • B. Cost center-based approval cannot be implemented.
  • C. Use the Manage Approval Groups task to define an approval group comprising all Cost Center managers, and use an HCM group in the workers’ Time Processing Profile to restrict approvers to only those required for the cost centers used on the time card.
  • D. Use the Manage Approval Groups task to define an approval group comprising all Cost Center manager
  • E. The Approval Rule will then route to the appropriate Cost Center managers.

Answer: C

NEW QUESTION 25
The HCM Groups you have created need to be refreshed nightly to update the group members based on employment changes.
What steps must you configure in order to include the group in the refresh process?

  • A. Schedule the “Evaluate HCM Group Membership” process to run nightly.
  • B. When configuring the HCM Group, you must select the “include in Refresh All Group Process” and then the group will automatically refresh nightly.
  • C. The Evaluate HCM Group Membership can only be configured to run for one group at a time, so you must setup a recurrence for each group to refresh separately nightly.
  • D. When Configuring the HCM Group, you must select the “Include in Refresh All Group process” checkbox, and then schedule the “Evaluate HCM Group Membership” process to run nightly.

Answer: D

NEW QUESTION 26
......

100% Valid and Newest Version 1z0-1048 Questions & Answers shared by Certstest, Get Full Dumps HERE: https://www.certstest.com/dumps/1z0-1048/ (New 83 Q&As)