Shortcuts To 200-125(191 to 200)

Are you any job hunter without a Cisco Cisco 200-125 certification? In case you are also busy upon working, please get Pass4sures Cisco training program. You will always be on the way to Cisco Cisco certification easier as well as earlier. We provide the most reliable as well as trustworthy materials. Our Cisco Cisco 200-125 simulated tests are within multiple choice which is the same as the true test. The particular Cisco questions are provided with verified answers. You can download the test engine in your PC, and accomplish the Cisco 200-125 exam dumps. The particular test engine make you encounter the Cisco 200-125 actual exam.

2016 Oct 200-125 brain dumps

Q191. - (Topic 7) 

Scenario: 

Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. 

You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices. 









An OSPF neighbor adjacency is not formed between R3 in the main office and R4 in the Branchl office. What is causing the problem? 

A. There is an area ID mismatch. 

B. There is a Layer 2 issue; an encapsulation mismatch on serial links. 

C. There is an OSPF hello and dead interval mismatch. 

D. The R3 router ID is configured on R4. 

Answer: A 


Q192. - (Topic 5) 

What authentication type is used by SNMPv2? 

A. HMAC-MD5 

B. HMAC-SHA 

C. CBC-DES 

D. community strings 

Answer: D 


Q193. - (Topic 2) 

Refer to the exhibit. 


A network administrator is configuring an EtherChannel between SW1 and SW2. The SW1 configuration is shown. What is the correct configuration for SW2? 

A. interface FastEthernet 0/1 

channel-group 1 mode active 

switchport trunk encapsulation dot1q 

switchport mode trunk 

interface FastEthernet 0/2 

channel-group 1 mode active 

switchport trunk encapsulation dot1q 

switchport mode trunk 

B. interface FastEthernet 0/1 

channel-group 2 mode auto 

switchport trunk encapsulation dot1q 

switchport mode trunk 

interface FastEthernet 0/2 

channel-group 2 mode auto 

switchport trunk encapsulation dot1q 

switchport mode trunk 

C. interface FastEthernet 0/1 

channel-group 1 mode desirable 

switchport trunk encapsulation dot1q 

switchport mode trunk 

interface FastEthernet 0/2 

channel-group 1 mode desirable 

switchport trunk encapsulation dot1q 

switchport mode trunk 

D. interface FastEthernet 0/1 

channel-group 1 mode passive 

switchport trunk encapsulation dot1q 

switchport mode trunk 

interface FastEthernet 0/2 

channel-group 1 mode passive 

switchport trunk encapsulation dot1q 

switchport mode trunk 

Answer: C 


Q194. - (Topic 3) 

A national retail chain needs to design an IP addressing scheme to support a nationwide network. The company needs a minimum of 300 sub-networks and a maximum of 50 host addresses per subnet. Working with only one Class B address, which of the following subnet masks will support an appropriate addressing scheme? (Choose two.) 

A. 255.255.255.0 

B. 255.255.255.128 

C. 255.255.252.0 

D. 255.255.255.224 

E. 255.255.255.192 

F. 255.255.248.0 

Answer: B,E 


Q195. - (Topic 3) 

Which three are characteristics of an IPv6 anycast address? (Choose three.) 

A. one-to-many communication model 

B. one-to-nearest communication model 

C. any-to-many communication model D. a unique IPv6 address for each device in the group 

E. the same address for multiple devices in the group 

F. delivery of packets to the group interface that is closest to the sending device 

Answer: B,E,F 


200-125  practice test

Rebirth 200-125 rapidshare:

Q196. DRAG DROP - (Topic 7) 


Answer: 



Q197. - (Topic 5) 

Which three features are added in SNMPv3 over SNMPv2? 

A. Message Integrity 

B. Compression 

C. Authentication 

D. Encryption 

E. Error Detection 

Answer: A,C,D 


Q198. - (Topic 6) 

Which two commands correctly verify whether port security has been configured on port FastEthernet 0/12 on a switch? (Choose two.) 

A. SW1#show port-secure interface FastEthernet 0/12 

B. SW1#show switchport port-secure interface FastEthernet 0/12 

C. SW1#show running-config 

D. SW1#show port-security interface FastEthernet 0/12 

E. SW1#show switchport port-security interface FastEthernet 0/12 

Answer: C,D 


Q199. - (Topic 2) 

A network administrator creates a layer 3 EtherChannel, bundling four interfaces into channel group 1. On what interface is the IP address configured? 

A. the port-channel 1 interface 

B. the highest number member interface 

C. all member interfaces 

D. the lowest number member interface 

Answer: A 


Q200. - (Topic 5) 

Which statement is correct regarding the operation of DHCP? 

A. A DHCP client uses a ping to detect address conflicts. 

B. A DHCP server uses a gratuitous ARP to detect DHCP clients. 

C. A DHCP client uses a gratuitous ARP to detect a DHCP server. 

D. If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict. 

E. If an address conflict is detected, the address is removed from the pool for an amount of time configurable by the administrator. 

F. If an address conflict is detected, the address is removed from the pool and will not be reused until the server is rebooted. 

Answer: D 



see more http://www.2passeasy.com/exam/200-125/