The Most Recent Guide To 201 Simulations

NEW QUESTION 1
Refer to the exhibit.

According to the shown Configuration Utility stings What is the setting of the User Directory configuration under the Authentication submenu?

• A. Local
• B. Managed
• C. Remote-TACACS+
• D. Default system configuration

Answer: C

NEW QUESTION 2
Where is persistence mirroring configured?

• A. It is always enabled.
• B. It is part of a pool definition.
• C. It is part of a profile definition.
• D. It is part of a virtual server definition.

Answer: C

NEW QUESTION 3
The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?

• A. Create a new VLAN object and set Customer Tag to 120
• B. Create a new VLAN object and assign the interface 1.1 untagged
• C. Create a new trunk object with interface 1.1 assigned
• D. Create a new trunk object and assign it to the VLAN

Answer: B

NEW QUESTION 4
A user needs to determine known security vulnerabilities on an existing BIG-IP appliance and how to remediate these vulnerabilities.
Which action should the BIG-IP Administrator recommend?

• A. Verify the TMOS version and review the release notes
• B. Create a UCS archive and upload to Health
• C. Create a UCS archive and open an F5 Support request
• D. Generate a view and upload to Heath

Answer: D

NEW QUESTION 5
Refer to the exhibit.

How many nodes are represented on the network map shown?

• A. Four
• B. Three
• C. One
• D. Two

Answer: B

NEW QUESTION 6
The BIG-IP appliance fails to boot. The BIG-IP Administrator needs to run the End User Diagnostics (EUD) utility to collect data to send to F5 Support.
Where can the BIG-IP Administrator access this utility?

• A. Console Port
• B. Internal VLAN interface
• C. External VLAN interface
• D. Management Port

Answer: A

NEW QUESTION 7
Users are unable to reach an application. The BIG-IP Administrator checks the Configuration Utility and observes that the Virtual Server has a red diamond in front of the status. What is causing this issue?

• A. All pool members are down.
• B. The Virtual Server is receiving HTTPS traffic over HTTP virtual.
• C. The Virtual Server is disabled.
• D. All pool members have been disabled.

Answer: A

NEW QUESTION 8
A site has six members in a pool. All of the servers have been designed, built, and configured with the same applications. It is known that each client's interactions vary significantly and can affect the performance of the servers. If traffic should be sent to all members on a regular basis, which loadbalancing mode is most effective if the goal is to maintain a relatively even load across all servers?

• A. Ratio
• B. Priority
• C. Observed
• D. Round Robin

Answer: C

NEW QUESTION 9
A virtual server is listening at 10.10.1.100:any and has the following iRule associated with it:
when CLIENT_ACCEPTED { if {[TCP::local_port] equals 80 } { pool pool1 } elseif {[TCP::local_port] equals 443} { pool pool2 }
If a user connects to 10.10.1.100 and port 22, which pool will receive the request?

• A. pool1
• B. pool2
• C. Non
• D. The request will be dropped.
• E. Unknow
• F. The pool cannot be determined from the information provided.

Answer: D

NEW QUESTION 10
A BIG-IP Administrator explicitly creates a traffic group on a BIG-IP device.
Which two types of configuration objects can be associated with this traffic group? (Choose two.)

• A. Pool Members
• B. Virtual Addresses
• C. iRules
• D. VLANS
• E. Application Instances

Answer: BE

NEW QUESTION 11
A BIG-IP Administrator notices that one of the servers that runs an application is NOT receiving any traffic. The BIG-IP Administrator examines the configuration status of the application and observes the displayed monitor configuration and affected Pool Member status.

What is the possible cause of this issue?

• A. The Node Health Monitor is NOT responding.
• B. The application is NOT responding with the expected Receive String.
• C. HTTP 1.1 is NOT appropriate for monitoring purposes.
• D. The BIG-IP device is NOT able to reach the Pool.

Answer: A

NEW QUESTION 12
Given that VLAN failsafe is enabled on the external VLAN and the network that the active BIG-IP's external VLAN is connected to has failed, which statement is always true about the results?

• A. The active system will note the failure in the HA table.
• B. The active system will reboot and the standby system will go into active mode.
• C. The active system will failover and the standby system will go into active mode.
• D. The active system will restart the traffic management module to eliminate the possibility that BIG-IP is the cause for the network failure.

Answer: A

NEW QUESTION 13
A BIG-IP Administrator finds the following log entry:
tnm tmm[7141]: 011e0002:4: sweeperjjpdate: aggressive mode activated. Which action should the BIG-IP Administrator to mitigate this memory issue?

• A. Configure the redundant par to be active-active
• B. Decrease the TCP profile ide Timeout value
• C. increase the TCP profile ide Timeout value
• D. Configure the serve to use Connection Mirroring

Answer: D

NEW QUESTION 14
A BIG-IP Administrator is receiving intermittent reports from users that SSL connections to the BIG-IP device are failing. Upon checking the log files, the BIG-IP Administrator notices the following error message:
ere tmm<instance>[<pid>]: 01260008:3: SSL transaction (TPS) rate limit reached
After reviewing statistics, the BIG-IP Administrator notices there are a maximum of 1200 client-side SSL TPS and a maximum of 800 server-side SSL TPS.
What is the minimum SSL license limit capacity the BIG-IP Administrator should upgrade to handle this peak?

• A. 2000
• B. 400
• C. 800
• D. 1200

Answer: D

NEW QUESTION 15
A BIG-IP Administrator needs to modify a virtual server that web offload web traffic compression tasks from the target server.
Which two profiles must the BIG-IP Administrator apply to a virtual server to enable compression? (Choose two)

• A. Server SSL profile
• B. Stream profile
• C. Persistence profile
• D. HITP profile
• E. Compression profile

Answer: DE

NEW QUESTION 16
A BIG-IP Administrator must determine if a Virtual Address is configured to fail over to the standby member of a device group in which area of the Configuration Utility can this be confirmed?

• A. Device Management > Traffic Groups
• B. Device Management > Devices
• C. Local Traffic > Virtual Servers
• D. Device Management > Overview

Answer: C

NEW QUESTION 17
......