Download 300-075 class Reviews & Tips

All the Cisco 300-075 practice questions which usually with precise and also verified answers are developed and updated through our innovative professionals in the field of web. Taking the actual Cisco 300-075 simulated test you are going to get a large mark which usually guarantee your current success. The Cisco Cisco 300-075 braindumps have excellent value and also high good quality which assure you the passing score, or you are going to get your current purchasing charges back. While if you dont desire to the refund, we can easily send anyone another Cisco 300-075 dumps with regard to free. All of us hope you get with the Cisco certification exam smoothly.


The article at Testaimer.com going over http://www.testaimer.com/300-075-test is very comprehensive.

2017 Mar 300-075 test

Q121. In which two locations can you verify that a phone has a standby Cisco Unified Communications Manager? (Choose two.) 

A. RTMT 

B. phone menu 

C. Cisco Unified Serviceability 

D. phone webpage 

Answer: B,D 


Q122. Which statement about SIP precondition is most correct? 

A. When configuring SIP precondition, the SIP trunk must have access to an RSVP agent. 

B. When configuring SIP precondition, the IP phones must have access to an RSVP agent. 

C. When configuring SIP precondition, the IP phones and SIP trunk must have access to an RSVP agent. 

D. RSVP agents are only required for the IP phones. SIP trunks require RSVP agents only when fall back to local RSVP is configured. 

E. SIP trunk will always require RSVP agents regardless of what RSVP type is configured. 

Answer:


Q123. Which action configures the registration of transcoder resources? 

A. Cisco IOS software registers transcoder resources with SIP. 

B. Cisco IOS software registers transcoder resources with SCCP. 

C. Cisco IOS software registers transcoder resources with H.323. 

D. Cisco IOS software does not register transcoder resources. 

Answer:


Q124. Refer to the exhibit. 

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. Assuming the PSTN does not accept globalized numbers with + prefix. What should the Called Party Transformation Pattern at the U.S. gateway be configured as? 

A. \+.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: + 

B. \+1.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

C. \+408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: 1 

D. \+1408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

E. \+1.408! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

Answer:


Q125. Which action configures CAC utilizing only Cisco Unified Communications Manager software? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure Cisco Unified Communications Manager locations. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager MTPs. 

Answer:


Renovate 300-075 torrent:

Q126. What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence endpoints? 

A. CS3 (24) 

B. EF (46) 

C. AF41 (34) 

D. CS4 (32) 

Answer:


Q127. The following exhibit shows configs for H.323 gateway. You have been asked to implement TEHO from a remote branch office with area code 301 to the HQ office with area code 201 using Cisco Unified Communications Manager. The remote office has an MGCP gateway and the HQ office has an H.323 gateway. Once the call arrives at the HQ, it should break out to the PSTN as a seven-digit local call. Which statement about the route pattern is true? 

A. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 

B. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot 

C. route pattern should be 91201.[2-9]XXXXXX 

D. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot 

E. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E 

Destination pattern is 91, HQ office area code is 201 . 


Q128. You have been asked to deploy Cisco Extension Mobility Cross Cluster for a distributed call processing environment. During the initial extension mobility login request, how does the visiting cluster determine if the user is a local user or a remote user? 

A. by using a third-party automatic provisioning tool to verify user ID 

B. by broadcasting a request to all clusters to verify the user type 

C. from user IDs that are created by default when the user logs in 

D. by using Extension Mobility Cross Cluster Session Initiation Protocol (SIP) trunks 

E. by verifying against the local database 

F. by verifying the visiting Trivial File Transfer Protocol 

Answer:


Q129. Which statement is true when considering a Cisco VoIP environment for regional configuration? 

A. G.711 requires 128K of bandwidth per call. 

B. G.729 requires 24K of bandwidth per call. 

C. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified Communications Manager environment. 

D. To deploy a Cisco H.323 gatekeeper, you must configure MTP resources on the gatekeeper and only use G.711 between regions. 

Answer:


Q130. Scenario There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

The intercluster URI call routing no longer allows calls between sites. What is the reason why this would happen? (Choose two) 

A. Wrong SIP domain configured. 

B. User is not associated with the device. 

C. IP or DNS name resolution issue. 

D. No SIP route patterns for cisco.lab exist. 

Answer: C,D