A Review Of Free 300-075 pack
Exambible make fun of 300-075 audit is usually written by the nice pros who tend to be expert around research. Cisco 300-075 Questions and answers as well as revealed in an uncomplicated method will stay could comprehend all of them adequately. Cisco 300-075 deposits as well as previous tests help you to completely ready to the legitimate audit thoughts. Each resource offered by Exambible has been hand crafted by simply we connected with practicing The item Individuals. You can be positive that your particular Exambible Acquire 300-075, 300-075 R and also a, 300-075, as well as 300-075 brain deposits are definitely the finest, as well as tailored to generate the learning enjoy the most suitable option you may make around get yourself ready for your own Accreditation.
The article at Testaimer.com going over http://www.testaimer.com/300-075-test is very comprehensive.
2021 Mar 300-075 torrent
Q91. Which device must be accessible from the public Internet in a Collaboration Edge environment?
B. Cisco Unified Communications Manager
C. Cisco IM and P
E. VCS Control
Q92. Which action configures phones in site A to use G.711 to site B but to use G.729 to site C?
A. Configure Cisco Unified Communications Manager regions.
B. Configure Cisco Unified Communications Manager locations.
C. Configure transcoder resources in Cisco Unified Communications Manager.
D. Configure a gatekeeper.
Q93. What impact do roaming-sensitive settings and Device Mobility settings have on call routing?
A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS.
B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS.
C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS.
D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS.
Q94. Refer to the exhibit.
You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager. When you review the configurations in both devices the IP addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco Unified Communications Manager. Which command needs to be edited to allow the transcoder to register properly?
A. The associate profile and dsp farm profile numbers need to match associate ccm 2 command.
B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10.1.1.1 command.
C. The sccp ccm group number needs to match the associate ccm 2 command.
D. The maximum sessions command must match the number of codecs configured under the dsp farm profile.
E. The sccp ccm group number must match the voice-card number.
Incorrect Answer: A, C, D, E The value of the IP address should match the IP address in the ip source-address command Link:
Q95. Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure?
A. SRST with MGCP fallback
B. SRST without MGCP fallback
C. Cisco Unified Communications Manager Express in SRST mode
D. SRST with VoIP dial peers to Cisco Unified Communications Manager Express
Improve 300-075 exam answers:
Q96. When an incoming PSTN call arrives at an MGCP gateway, how does the calling number get normalized to a global E.164 number with the + prefix in Cisco Unified Communications Manager?
A. Normalization is done using translation patterns.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Incorrect Answer: A, B, C, E Configuring calling party normalization alleviates issues with toll bypass where the call is routed to multiple locations over the IP WAN. In addition, it allows Cisco Unified Communications Manager to distinguish the origin of the call to globalize or localize the calling party number for the phone user. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fscallpn.html
Q97. Refer to the exhibit.
IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.)
A. Add port 1/0:23 to dial-peer voice 123 pots.
B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4.
C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All).
D. Add the command h323-gateway voip id on interface vlan120.
E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4.
Incorrect Answer: A, C, D Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06trunk.html
Q98. This is the configuration on the voice gateway:
max-dn 60 preference 0
srst mode auto-provision all
srst dn line-mode dual
srst dn template 3 srst ephone description
srst fallback auto-provision phone
srst ephone template 5
Which ephone-dn would be expected upon activation of SRST?
A. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones
B. ephone-dn 1 dual-linenumber 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones
C. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 5This DN is learned from srst fallback ephones
D. ephone-dn 1number 7001description 7001name 7001ephone-dn-template 3This DN is learned from srst fallback ephones
Q99. Which three of the following are steps in configuring MGCP Fallback and Cisco Unified SRST? (Choose three)
A. Define the SRST reference for phones in the Device Pool configuration
B. Enable and configure the MGCP fallback and Cisco Unified SRST features on the IOS gateways.
C. Implement a simplified SRST dial plan on the remote-site-gateways to ensure connectivity for remote-site phones in SRST mode.
D. Enable SIP trunking between both remote and hub sites to provide mesh coverage.
E. Define the SRST reference in the configuration on the IP Phones.
F. Enable and configure the MGCP fallback on the IOS gateway but not Cisco Unified SRST since it is enabled automatically.
Q100. Refer to the exhibit.
The H.323 Gateway is showing status “unknown”. Which statement is true?
A. The gateway must be reset in Cisco Unified Communications Manager.
B. The no gateway command followed by the gateway command must be issued in Cisco IOS.
C. The mgcp commands must be removed.
D. H.323 gateways do not register with Cisco Unified Communications Manager H.323 gateways always show status "Unknown".
E. VUAN 1 20 may be down and so the H.323 gateway appears offline to the Cisco Unified Communications Manager
Incorrect Answer: A, B, C, E
After a gateway is registered with Cisco Unified Communications Manager, gateway registration status may display in Cisco Unified Communications Manager Administration as unknown.