Tips for 300 075 dump
Act now and download your Cisco 300 075 dump test today! Do not waste time for the worthless Cisco 300 075 ciptv2 tutorials. Download Update Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam with real questions and answers and begin to learn Cisco 300 075 ciptv2 with a classic professional.
The article at Testaimer.com going over http://www.testaimer.com/300-075-test is very comprehensive.
Q71. Refer to the exhibit.
When the user of a phone registered to the Cisco Unified Communications Manager places a call to 3001 when the SAF network is down, what happens?
A. The call fails.
B. The call is rerouted to the PSTN with the constructed PSTN number as +442288223001
C. The call is rerouted to the PSTN with the constructed PSTN number as 442288223001
D. The call is rerouted to the PSTN with the constructed PSTN number as 0002288223001
E. The call is rerouted to the PSTN with the constructed PSTN number as +0002288223001
Answer: A
Explanation:
Incorrect Answer: B, C, D When the SAF forwarder loses network connection with its call-control entity, the SAF forwarder withdraws those learned patterns that were published by the call control entity. In this case, CCD requesting service marks those learned patterns as unreachable via IP, and the calls get routed through the PSTN gateway. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fscallcontrol discovery.html
Q72. Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager Express has registered with the SAF Forwarder?
A. show eigrp service-family ipv4 clients
B. show eigrp address-family ipv4 clients
C. show voice saf dndb all
D. show saf registration
E. show ip saf registration
Answer: A
Explanation:
Incorrect Answer: B, C, D, E show eigrp service-family ipv4 clients Displays information from the EIGRP IPv4 service-family results.
Q73. Refer to the exhibit.
Assume a centralized Cisco Unified Communications deployment with the headquarters in the U.K, and remote site in RTP. All route patterns are assigned a route list that points to the local route group. Local route groups have been configured on the U.K and RTP device pools. A U.K. user logs onto an RTP phone using the Cisco Extension Mobility feature and places an emergency call to 0000. Which statement about the emergency call is true?
A. The call will match the U.K_Emergency route pattern partition and will egress at the RTP gateway.
B. The call will match the U.K_Emergency route pattern partition and will egress at the U.K. gateway.
C. The call will match the RTP_Emergency route pattern partition and will egress at the U.K. gateway.
D. The call will match the RTP_Emergency route pattern partition and will egress at the RTP gateway.
E. The call will fail.
Answer: A
Q74. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
SX20 System Information
DX650 Configuration
MRGL
DP
Locations
AARG
CSS
Movi Failure
Movi Settings
Which device configuration option will allow an administrator to assign a device to specific rights for making calls to specific DNs?
A. Media Resource Group List
B. Device Pool
C. Location
D. AAR Group
E. Calling Search Space
Answer: E
Explanation:
A partition comprises a logical grouping of directory numbers (DNs) and route patterns with similar reachability characteristics. Devices that are typically placed in partitions include DNs and route patterns. These entities associate with DNs that users dial. For simplicity, partition names usually reflect their characteristics, such as "NYLongDistancePT," "NY911PT," and so on. A calling search space comprises an ordered list of partitions that users can look at before users are allowed to place a call. Calling search spaces determine the partitions that calling devices, including IP phones, softphones, and gateways, can search when attempting to complete a call.
Q75. Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose three.)
A. call-manager-fallback
B. max-ephones
C. keepalive
D. limit-dn
E. ip source-address
Answer: A,B,E
Q76. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DNS Servers
Device Pool
Expressway
ILS
Locations
MRA
Speed Dial
SIP Trunk
Which three configuration tasks need to be completed on the router to support the registration of Cisco Jabber clients? (Choose three.)
A. The DNS server has the wrong IP address.
B. The internal DNS Service (SRV) records need to be updated on the DNS Server.
C. Flush the DNS Cache on the client.
D. The DNS AOR records are wrong.
E. Add the appropriate DNS SRV for the Internet entries on the DNS Server.
Answer: B,C,E
Q77. Which option configures the secondary dial tone option for SRST mode to let the users hear the dial tone for PSTN calls?
A. voice service voipsecondary dialtone 0
B. call-manager-fallbacksecondary dialtone 0
C. dial-peer voice 1 potssecondary dialtone 0
D. ccm-manager secondary dialtone 0
Answer: B
Q78. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DP
Locations
CSS
Movi Failure
Movi Settings
CIPTV Topo
Subzone
Links
Pipe
Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can’t make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure?
A. Wrong username and/or password.
B. Wrong SIP domain name.
C. The TMSPE is not working.
D. The bandwidth is incorrectly configured.
Answer: D
Q79. Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones? (Choose three.)
A. Configure a phone NTP reference.
B. Configure an SRST reference.
C. Configure the SIP registrar.
D. Configure voice register global dn.
E. Configure voice register pool.
F. Configure telephony service.
Answer: B,C,E
Q80. You are deploying a Cisco Unified Communications Manager solution with MGCP gateways at multiple locations. Which firewall and ACL configuration must you perform to allow the MCGP gateways to function correctly?
A. Allow access to TCP port 2428.
B. Block TCP port 1720.
C. Open access to all TCP and UDP ports.
D. Allow access to TCP port 1720.
E. Block access to TCP ports 2427 and 2428.
Answer: A