Tactics to 300 075 ciptv2

It is impossible to pass Cisco 300 075 ciptv2 exam without any help in the short term. Come to Pass4sure soon and find the most advanced, correct and guaranteed Cisco 300 075 pdf practice questions. You will get a surprising result by our Leading Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) practice guides.

Q21. Refer to the exhibit. 

How does the Cisco Unified Communications Manager advertise dn-block 1? 

A. 4XXX and the ToDID will 0: 

B. 4XXX and the ToDID will 0:1972555 

C. 4XXX 

D. 4XXX and the ToDID will 0:+ 1972555 

E. 19725554XXX 

Answer: B 

Q22. Which three tests can you perform to verify redundancy in the customer environment? (Choose three.) 

A. Verify that all phones are registered to a second subscriber server. 

B. Verify that media resources fail over to a secondary subscriber server when the publisher fails. 

C. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection is disconnected. 

D. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers. 

E. Verify that the H.323 redundant connection is active. 

F. Verify that SCCP fallback is configured in Cisco Unified Communications Manager. 

Answer: A,B,C 

Q23. Refer to the exhibit. 

All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented? 

A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0. 

B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first. 

C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first. 

D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool. 

Answer: C 

Q24. Refer to the exhibit. 

The H.323 Gateway is showing status “unknown”. Which statement is true? 

A. The gateway must be reset in Cisco Unified Communications Manager. 

B. The no gateway command followed by the gateway command must be issued in Cisco IOS. 

C. The mgcp commands must be removed. 

D. H.323 gateways do not register with Cisco Unified Communications Manager H.323 gateways always show status "Unknown". 

E. VUAN 1 20 may be down and so the H.323 gateway appears offline to the Cisco Unified Communications Manager 

Answer: D 

Explanation: 

Incorrect Answer: A, B, C, E 

After a gateway is registered with Cisco Unified Communications Manager, gateway registration status may display in Cisco Unified Communications Manager Administration as unknown. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06gtway. html 

Q25. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager? 

A. to allow for supplementary services such as hold, transfer, and conferencing 

B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server 

C. when you need the ability to grow support by using DSPs 

D. when you want to only use Cisco Unified Communications Manager resources 

Answer: C 

Q26. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.) 

A. RSVP can be enabled selectively between pairs of locations. 

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical 

configuration that is ignoring the physical topology. 

C. RSVP is topology aware, but only works with full mesh networks. 

D. An RSVP agent is a Media Termination Point that the call has to flow through. 

E. RSVP and RTP are used between the two endpoints. 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214 

Q27. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can’t make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure? 

A. Wrong username and/or password. 

B. Wrong SIP domain name. 

C. The TMSPE is not working. 

D. The bandwidth is incorrectly configured. 

Answer: D 

Q28. Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes? 

A. show eigrp address-family ipv4 saf 

B. show voice saf routes 

C. show voice saf detail 

D. show eigrp service-family ipv4 saf 

E. show voice saf dndb all 

Answer: E 

Explanation: 

Incorrect Answer: A, B, C, D Router# show voice saf dnDb all Total no. of patterns in db/max allowed : 1/6000 Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats -Patterns w/ invalid expr detected while add : 0 Patterns duplicated under the same instance : 0 Patterns rejected overall due to max capacity : 0 Attempts to delete a pattern which is invalid : 0 

Last successful DB update @ 2009:12:14 15:42:45:967 Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/feature/guide/SAF_FeatureModule.html#wp1202115 

Q29. How do RSVP-enabled locations differ from Cisco Unified Communications Manager locations? 

A. RSVP is configured in the ISR independent of Cisco Unified Communications Manager. 

B. RSVP enables AAR within Cisco Unified Communications Manager. 

C. RSVP is topology aware. 

D. RSVP is configured in Cisco Unified Communications Manager independent of the ISR. 

Answer: C 

Q30. Which solution is needed to enable presence and extension mobility to branch office phones during a WAN failure? 

A. SRST with MGCP fallback 

B. SRST without MGCP fallback 

C. Cisco Unified Communications Manager Express in SRST mode 

D. SRST with VoIP dial peers to Cisco Unified Communications Manager Express 

Answer: C