How to pass 300 075 vce in Jul 2017
Cause all that matters here is passing the Cisco cisco 300 075 exam. Cause all that you need is a high score of 300 075 ciptv2 Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam. The only one thing you need to do is downloading Examcollection 300 075 vce exam study guides now. We will not let you down with our money-back guarantee.
Q61. Which action configures AAR to route the calls that have been rejected by the gatekeeper CAC through the PSTN?
A. Configure Cisco IP Phones for AAR.
B. Configure AAR to work with SRST.
C. Configure AAR to work with CTI route points.
D. This configuration is not possible using AAR.
Q62. Which statement best describes globalized call routing in Cisco Unified Communications Manager?
A. All incoming calling numbers on the phones are displayed as an E.164 with the + prefix.
B. Call routing is based on numbers represented as an E.164 with the + prefix format.
C. All called numbers sent out to the PSTN are in E.164 with the + prefix format.
D. The CSS of all phones contain partitions assigned to route patterns that are in global format.
E. All phone directory numbers are configured as an E.164 with the + prefix.
Incorrect Answer: A, C, D, E For the destination to be represented in a global form common to all cases, we must adopt a global form of the destination number from which all local forms can be derived. The + sign is the mechanism used by the ITU's E.164 recommendation to represent any PSTN number in a global, unique way. This form is sometimes referred to as a fully qualified PSTN number. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/dialplan.html#wp1153205
Q63. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones?
A. Configure the branch office IP phones with CSS and partitions.
B. Configure the branch office IP phones with MRGs and MRGLs.
C. Configure the branch office IP phones with regions.
D. Configure the branch office IP phones with locations.
Q64. Which two entities could be represented by device mobility groups? (Choose two.)
C. directory numbers
Q65. Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. To match the US-TEHO pattern \+!, how should the translation pattern be configured?
A. 9001.4085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +
B. 9.0014085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1
C. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1
D. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +
E. 001.4085551234 with the Called Party Transformation:Prefix Digits Outgoing Calls: +
Incorrect Answer: A, B, C The PSTN access code for the UK is 9, International call code is 001, The international escape character, +, signifies the international access code in a complete E.164 number format Link: http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03r p.html
Q66. When Cisco Extension Mobility is implemented, how is the audio source for the MOH selected?
A. The audio source that is configured at the user device profile is selected.
B. The audio source that is configured at the home phone of the user is selected.
C. The audio source that is configured at the physical phone used for the Cisco Extension Mobility login is selected.
D. The audio source that is configured in the IP Voice Media Streaming parameters is selected.
Incorrect Answer: B, C, D To specify the audio source that plays when a user initiates a hold action, choose an audio source from the User Hold MOH Audio Source drop-down list box from device profile configuration settings. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06dvprf.html
Q67. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?
A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.
B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.
C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.
D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.
Incorrect Answer: A, B, D calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +. Link:
Q68. When a SIP trunk is added for Call Control Discovery, which statement is true?
A. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Enable SAF check box should be selected.
B. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Trunk Service Type should be Call Control Discovery.
C. The SIP trunk is added by selecting Call Control Discovery Trunk and then selecting SIP as the protocol to be used.
D. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The destination IP address field is configured as ‘SAF’ to indicate that this trunk is used for SAF.
Q69. When you use the Query wizard to configure the trace and log central feature to collect install logs, if you have servers in a cluster in a different time zone, which time is used?
A. TLC adjusts the time change appropriately.
B. TLC uses its local time for all systems.
C. TLC queries for the time zone as part of configuration.
D. TLC produces an error and must be run remotely.
Q70. Which statement is not true about GARP?
A. GARP attacks require access to the target LAN or VLAN.
B. GARP can be used for a man-in-the-middle attack.
C. GARP is normally used for HSRP.
D. GARP can be disabled at Cisco IP phones.
Incorrect Answer: A, B, D
GARP (Gratuitous ARP) announce the presence of IP Phone on the network.