[Improved] cisco 300 075
It is more faster and easier to pass the Cisco 300 075 ciptv2 exam by using Download Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) questuins and answers. Immediate access to the Abreast of the times 300 075 pdf Exam and find the same core area 300 075 pdf questions with professionally verified answers, then PASS your exam with a high score now.
Q101. You are the Cisco Unified Communications Manager in Certpaper.com. You use a remote site MGCP gateway to provide redundancy when connectivity to the central Cisco Unified Communications Manager cluster is lost. How to enable IP phones to establish calls to the PSTN when they have registered with the gateway? (Choose three.)
A. POTS dial peers must be added to the gateway to route calls from the IP phones to the PSTN.
B. The default service must be enabled globally.
C. The command ccm-manager mgcp-fallback must be configured.
D. COR needs to be configured to disallow outbound calls.
Answer: A,B,C
Explanation:
Incorrect Answer: D Class of restriction: Cisco Unified Communications Manager Business Edition 3000 supports class of service (CoS) with respect to geographic reach as follows:
– Campus
– Local
– National
– International
– Emergency services
. Call waiting
. Default ringtones
. MoH
. Speed dials: Single-button, not BLF
Link: http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps11370/data_sheet_
c78-651909.html
Q102. Which two options enable routers to provide basic call handling support for Cisco Unified IP Phones if they lose connection to all Cisco Unified Communications Manager systems?
(Choose two.)
A. SCCP fallback
B. Cisco Unified Survivable Remote Site Telephony
C. Cisco Unified Communications Manager Express
D. MGCP fallback
E. Cisco Unified Communications Manager Express in SRST mode
Answer: B,E
Q103. Which two options are valid service parameter settings that are used to set up proper video QoS behavior across the Cisco Unified Communications Manager infrastructure? (Choose two.)
A. DSCP for Video Calls when RSVP Fails
B. Default Intraregion Min Video Call Bit Rate (Includes Audio)
C. Default Interregion Max Video Call Bit Rate (Includes Audio)
D. DSCP for Video Signaling
E. DSCP for Video Signaling when RSVP Fails
Answer: A,C
Q104. The relationship between a Region and a Location is that the Region codec parameter is used between a Region and its configured Locations.
A. TRUE
B. FALSE
Answer: B
Explanation:
Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1033331
Q105. Refer to the exhibit.
The HQ Cisco Unified Communications Manager has been configured for end-to-end
RSVP. The BR Cisco Unified Communications Manager has been configured for local
RSVP.
RSVP between the locations assigned to the IP phones and SIP trunks at each site are configured with mandatory RSVP. When a call is placed from the IP phone at HQ to the BR phone at the BR site, which statement is true?
A. The Cisco Unified Communications Manager at HQ will fall back to local RSVP and place the call. No RSVP end-to-end will occur.
B. RSVP end-to-end will occur.
C. The Cisco Unified Communications Manager at HQ will use end-to-end RSVP. The BR Cisco Unified Communications Manager will use local RSVP.
D. The call will fail.
E. The call will proceed as a normal call with no RSVP reservation.
Answer: D
Explanation:
Incorrect Answer: A, B, C A possible cause is that the same router is being used as the calling and called RSVP agents, and that router is not running the latest IOS version, which supports loopback on RSVP reservation. Make sure that the router is running the latest IOS version. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.html #wp1155102
Q106. Which two features require or may require configuring a SIP trunk? (Choose two.)
A. SIP gateway
B. Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
C. Cisco Device Mobility
D. Cisco Unified Mobility
E. registering a SIP phone
Answer: A,B
Explanation:
Incorrect Answer: C, D, E All protocols require that either a signaling interface (trunk) or a gateway be created to accept and originate calls. Device mobility allows Cisco Unified Communications Manager to determine whether the phone is at its home location or at a roaming location. Cisco Unified Mobility gives users the ability to redirect incoming IP calls from Cisco Unified Communications Manager to different designated phones, such as cellular phones. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08sip.html# wpxref77849
Q107. What user profile is used to define the settings for a user on login?
A. Device Profile
B. Group Profile
C. Pool Profile
D. Specific Profile
Answer: A
Q108. When using Cisco Unified Communications Manager Express in SRST mode, how many multicast music on hold streams can be utilized by the system at any given time?
A. 3
B. 6
C. 2
D. 4
E. 1
F. 5
Answer: B
Q109. A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway. What should the gateway type be?
A. H.323 gateway
B. Cisco 3825
C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected.
D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router.
E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router.
Answer: A
Q110. Refer to the exhibit.
Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1.
How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups?
A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number.
B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice.
C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway.
D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number.
Answer: A
Explanation:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html #wpxref46617