How to pass cisco 300 075 in Aug 2021

Our pass rate is high to 98.9% and the similarity percentage between our 300 075 dump study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 075 dump exam in just one try? I am currently studying for the Cisco 300 075 vce exam. Latest Cisco 300 075 dump Test exam practice questions and answers, Try Cisco cisco 300 075 Brain Dumps First.

Q81. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. 

Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

Which partition should be configured in the AAR CSS applied at the phones? 

A. PSTN partition 

B. LD partition 

C. The HQ AAR CSS must include a partition assigned to route pattern 91408XXXXXXX. The BR1 AAR CSS must include a partition assigned to route pattern 91650XXXXXXX. 

D. AAR CSS must contain translation pattern 9.1[2-9]XX[2-9]XXXXXX for each site that must be globalized. Otherwise the called numbers will not be localized at the egress gateway. 

Answer: A 

Q82. How does the system intelligently shift call processing upon restoration of WAN connectivity? 

A. automatically back to the primary Cisco Unified Communications Manager cluster 

B. manually back to the primary Cisco Unified Communications Manager cluster 

C. automatically back to the secondary Cisco Unified Communications Manager cluster 

D. manually back to the secondary Cisco Unified Communications Manager cluster 

Answer: A 

Q83. Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone so that users see the calling number in a local format? 

A. Calling number localization is done using translation patterns. 

B. Calling number localization is done using route patterns. 

C. Calling number localization is done by configuring a calling party transformation CSS at the phone. 

D. Calling number localization is done by configuring a calling party transformation CSS at the gateway. 

E. Calling number localization is done by configuring the phone directory number in a localized format. 

Answer: C 

Q84. When considering Extension Mobility, what happens if a user logs into a phone for which the user does not have a user device profile? 

A. The phone reboots with an error. 

B. If a default device profile for this phone has been configured, it is loaded. 

C. The user cannot log in. 

D. Another user device profile is loaded. 

Answer: B 

Q85. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.) 

A. Incorrect username and password 

B. Wrong SIP domain configured. 

C. User is not associated with the device. 

D. IP or DNS name resolution issue. 

E. CSF Device is not registered. 

F. IP Phone DN not associated with the user. 

Answer: B,D 

Q86. Which CAC configuration on a gatekeeper restricts to 10 G.711 audio calls? 

A. Use the command bandwidth 10. 

B. Use the command bandwidth 1280. 

C. Use the command bandwidth 160. 

D. Use the command bandwidth session 10. 

Answer: B 

Q87. When you configure Cisco Unified Communications Manager, you need to configure the router for Survivable Remote Site Telephony in case the Cisco Unified Communications Manger stops working. On which two factors would the number of IP phones and Directory Numbers that can register to the SRST router depend? (Choose two.) 

A. The protocol that is used in Cisco Unified Communications Manager 

B. Cisco Unified Communications Manager version 

C. Cisco IOS Software version 

D. WAN link bandwidth 

E. capacity of the Cisco Media Convergence Server 

F. router platform 

Answer: C,F 

Q88. Which two statements are true regarding the implementation of globalized call-routing in terms of localized call egress? (Choose two.) 

A. Calling-party numbers are routed from the gateway or trunks to phones. 

B. Called-party numbers are routed from the gateway or trunks to phones. 

C. Calling-party numbers of internal calls are routed from the gateway or trunks. 

D. Calling-party calls are routed to the gateway and trunks. 

Answer: A,D 

Q89. The VCS Expressway can be configured with security controls to safeguard external calls and endpoints. One such option is the control of trusted endpoints via a whitelist. Where is this option enabled? 

A. on the voice-enabled firewall at the edge of the network 

B. on the VCS under Configuration > registration > configuration 

C. on the TMS server under Registrations > whitelist 

D. on the VCS under System > configuration > Registrations 

Answer: B 

Q90. When configuring a video ISDN gateway, which two actions are requirements for the Cisco Preferred Architecture for Enterprise Collaboration? (Choose two.) 

A. Use SIP instead of H.323. 

B. Perform dial string manipulation on Cisco Unified Communications Manager. 

C. Use an * (asterisk) at the end of each ISDN number, as a suffix. 

D. Use an ! (exclamation point) at the end of each ISDN number, as a suffix. 

E. Use H.323 instead of SIP. 

Answer: A,B