Examples of 300 075 ciptv2

It is more faster and easier to pass the Cisco 300 075 dump exam by using Accurate Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) questuins and answers. Immediate access to the Abreast of the times 300 075 dump Exam and find the same core area 300 075 dump questions with professionally verified answers, then PASS your exam with a high score now.

Q31. Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other video endpoint. Which two steps must the administrator take to add the SIP trunk? (Choose two.) 

A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server. 

B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster. 

C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone. 

D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP. 

E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate. 

Answer: A,C 


Q32. The network administrator at Enterprise X is creating the guidelines for a new IPT deployment consisting of a large number of remote offices. Every user within Enterprise X is assigned a directory number of 5 digits. Which option might cause an issue in a multisite deployment? 

A. Overlapping DID ranges are allocated to each site. 

B. The maximum number of IP phones are in use at each remote site. 

C. MoH cannot be provided for the remote sites. 

D. All media streams are necessarily routed through the central office for calls to establish correctly. 

Answer:


Q33. What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified Communications Manager? 

A. to allow for supplementary services such as hold, transfer, and conferencing 

B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate server 

C. when you need the ability to grow support by using DSPs 

D. when you want to only use Cisco Unified Communications Manager resources 

Answer:


Q34. Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager Express has registered with the SAF Forwarder? 

A. show eigrp service-family ipv4 clients 

B. show eigrp address-family ipv4 clients 

C. show voice saf dndb all 

D. show saf registration 

E. show ip saf registration 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E show eigrp service-family ipv4 clients Displays information from the EIGRP IPv4 service-family results. 


Q35. In a cluster-wide deployment, what is the maximum number of Service Advertisement Framework forwarders to which the Cisco Unified Communications Manager can connect? 

A. 1 

B. 2 

C. 3 

D. 4 

E. 6 

F. as many as are configured 

Answer:


Q36. Which option indicates the best QoS parameters for interactive video? 

A. 1% Max Loss, 150 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning 

B. 5% Max Loss, 5 s One-way Latency, 30 ms Jitter, 20% Overprovisioning 

C. 0% Max Loss, 100 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning 

D. 1% Max Loss, 160 ms One-way Latency, 60 ms Jitter, 10% Overprovisioning 

Answer:


Q37. Which three of the following are steps in configuring MGCP Fallback and Cisco Unified SRST? (Choose three) 

A. Define the SRST reference for phones in the Device Pool configuration 

B. Enable and configure the MGCP fallback and Cisco Unified SRST features on the IOS gateways. 

C. Implement a simplified SRST dial plan on the remote-site-gateways to ensure connectivity for remote-site phones in SRST mode. 

D. Enable SIP trunking between both remote and hub sites to provide mesh coverage. 

E. Define the SRST reference in the configuration on the IP Phones. 

F. Enable and configure the MGCP fallback on the IOS gateway but not Cisco Unified SRST since it is enabled automatically. 

Answer: A,B,C 


Q38. Refer to the exhibit. 

How does the Cisco Unified Communications Manager advertise dn-block 2? 

A. 14087071222 with number type international 

B. +14087071222 with number type international 

C. +14087071222 

D. 14087071222 

Answer:


Q39. Which command is needed to utilize local dial peers on an MGCP-controlled ISR during an SRST failover? 

A. ccm-manager fallback-mgcp 

B. telephony-service 

C. dialplan-pattern 

D. isdn overlap-receiving 

E. voice-translation-rule 

Answer:


Q40. Which device must be accessible from the public Internet in a Collaboration Edge environment? 

A. Expressway-C 

B. Cisco Unified Communications Manager 

C. Cisco IM and P 

D. Expressway-E 

E. VCS Control 

Answer: