Getting Smart with: 300 075 ciptv2
Act now and download your Cisco 300 075 ciptv2 test today! Do not waste time for the worthless Cisco cisco 300 075 tutorials. Download Most up-to-date Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam with real questions and answers and begin to learn Cisco 300 075 vce with a classic professional.
Q41. Which two configurations can you perform to allow Cisco Unified Communications Manager SIP trunks to send an offer in the INVITE? (Choose two.)
A. Enable the Media Termination Point Required option on the SIP trunk.
B. Enable the Early Offer Support for Voice and Video Calls option on the SIP profile.
C. Select the Display IE Delivery check box in the gateway configuration.
D. Select the Enable Inbound FastStart check box on the Cisco Unified Communications Manager servers.
E. Select the SRTP Allowed check box on the SIP trunk.
F. Execute the isdn switch-type primary-ni command globally.
Answer: A,B
Q42. Which commands are needed to configure Cisco Unified Communications Manager Express in SRST mode?
A. telephony-service and srst mode
B. telephony-service and moh
C. call-manager-fallback and srst mode
D. call-manager-fallback and voice-translation
Answer: A
Q43. Refer to the exhibit.
Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship?
A. the label name specified in the router eigrp command
B. the autonomous-system number specified in the service-family ipv4 autonomous-system command
C. the sf-interface configuration
D. the topology base configurations
E. the label name specified in the router eigrp command and the autonomous-system number
Answer: B
Explanation:
Incorrect Answer: A, C, D, E service-family ipv4 autonomous-system 1 enables a Cisco SAF service family for the specified autonomous system on the router Link:
http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1056363
Q44. Which two configurations are needed to implement SRST in Cisco Unified Communications Manager? (Choose two.)
A. SRST Gateway setting in Cisco Unified Communications Manager
B. SRST Reference configured in Cisco Unified Communications Manager
C. Device Pool SRST Reference setting
D. Call Manager Group setting
E. Cisco Unified Communications Locations setting
Answer: B,C
Q45. Which two configurable options are available to enable Early Offer for calls over a Cisco Unified Communications Manager SIP trunk? (Choose two.)
A. No Media Termination Point Required
B. Media Termination Point Required
C. Accept Audio Codec Preferences in Received Offer
D. Early Offer support for voice and video calls Mandatory (insert MTP if needed)
E. Use Trusted Relay Point
Answer: B,D
Q46. When Cisco Extension Mobility is implemented, how is the audio source for the MOH selected?
A. The audio source that is configured at the user device profile is selected.
B. The audio source that is configured at the home phone of the user is selected.
C. The audio source that is configured at the physical phone used for the Cisco Extension Mobility login is selected.
D. The audio source that is configured in the IP Voice Media Streaming parameters is selected.
Answer: A
Explanation:
Incorrect Answer: B, C, D To specify the audio source that plays when a user initiates a hold action, choose an audio source from the User Hold MOH Audio Source drop-down list box from device profile configuration settings. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06dvprf.html
Q47. During device failover to the secondary Cisco Unified Communications Manager server, how does the phone recognize that the primary server is back?
A. The secondary server keeps sending keepalive message to the primary server and when it succeeds, it unregisters the phones to force them to register to the primary.
B. When the primary server goes online, it sends out an "ALIVE" message via broadcast so that the phones re-register.
C. The phones never re-register with the primary server until the active (secondary) one goes down.
D. The phone sends keepalive messages to the primary server frequently and when it succeeds, the phone re-registers with it.
Answer: D
Q48. Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of?
A. First route group should point only to the U.K. gateway. The second route group should point to the U.S. gateway.
B. First route group should be only the local route group. The second route group should point to the U.S. gateway.
C. First route group should point only to the U.S. gateway. The second route group should be the local route group.
D. The TEHO-US route list should contain only the local route group. The globalized configuration means that the appropriate gateway will be selected automatically.
E. The \+! route pattern should point directly to the U.S. gateway.
Answer: C
Explanation:
Incorrect Answer: A, B, D The route group points to one or more gateways and can choose the gateways for call routing based on preference. The route group can serve as a trunk group by directing all calls to the primary device and then using the secondary devices when the primary is unavailable. One or more route lists can point to the same route group. Link:
http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08 gw.html#wp1167274
Q49. Which symbol is required for globalized call routing?
A. +
B. *
C. %
D. /
E. ;
Answer: A
Q50. You have been asked to deploy Cisco Extension Mobility Cross Cluster for a distributed call processing environment. During the initial extension mobility login request, how does the visiting cluster determine if the user is a local user or a remote user?
A. by using a third-party automatic provisioning tool to verify user ID
B. by broadcasting a request to all clusters to verify the user type
C. from user IDs that are created by default when the user logs in
D. by using Extension Mobility Cross Cluster Session Initiation Protocol (SIP) trunks
E. by verifying against the local database
F. by verifying the visiting Trivial File Transfer Protocol
Answer: E