Facts about 300 135 tshoot

Proper study guides for Regenerate Cisco TSHOOT Troubleshooting and Maintaining Cisco IP Networks certified begins with Cisco 300 135 tshoot preparation products which designed to deliver the Certified ccnp tshoot 300 135 questions by making you pass the 300 135 tshoot test at your first time. Try the free 300 135 tshoot demo right now.

P.S. Certified 300-135 bootcamp are available on Google Drive, GET MORE: https://drive.google.com/open?id=1BNfdP-dYaYDxxYw2CbIPONm9qPz9JsvY


New Cisco 300-135 Exam Dumps Collection (Question 2 - Question 11)

New Questions 2

Which of the following are correct statements?

A. EIGRP advertises the best routes to its neighbor.

B. EIGRP uses "cost" to determine best path.

C. EIGRP allows unequal cost load balancing.

D. OSPF requires neighbor adjacencies before updates are sent.

E. EIGRP advertises all routes to its neighbor.

F. OSPF allows unequal cost load balancing.

Answer: A,C,D



New Questions 3

The implementations group has been using the test bed to do a u2018proof-of-conceptu2019 that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.

Use the supported commands to isolated the cause of this fault and answer the following questions.

The fault condition is related to which technology?

A. BGP

B. NTP

C. IP NAT

D. IPv4 OSPF Routing

E. IPv4 OSPF Redistribution

F. IPv6 OSPF Routing

G. IPv4 layer 3 security

Answer: G

Explanation:

On R1, we need to permit IP 209.65.200.222/30 under the access list.



New Questions 4

The implementations group has been using the test bed to do a u2018proof-of-conceptu2019 that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services,

NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.

Use the supported commands to isolated the cause of this fault and answer the following questions.

The fault condition is related to which technology?

A. NTP

B. IP DHCP Helper

C. IPv4 EIGRP Routing

D. IPv6 RIP Routing

E. IPv4 layer 3 security

F. Switch-to-Switch Connectivity

G. Loop Prevention

H. Access Vlans

I. Port Security

J. VLAN ACL / Port ACL

K. Switch Virtual Interface

Answer: J

Explanation:

On DSW1, VALN ACL, Need to delete the VLAN access-map test1 whose action is to drop access-list 10; specifically 10.2.1.3



New Questions 5

The implementation group has been using the test bed to do an IPv6 'proof-of- concept1. After several changes to the network addressing and routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).

The fault condition is related to which technology?

A. NTP

B. IP DHCP Server

C. IPv4 OSPF Routing

D. IPv4 EIGRP Routing

E. IPv4 Route Redistribution

F. IPv6 RIP Routing

G. IPv6 OSPF Routing

H. IPV4 and IPV6 Interoperability

I. IPv4 layer 3 security

Answer: G

Explanation:

As explained earlier, the problem is with route redistribution on R4 of not redistributing RIP routes into OSPF for IPV6.

Topic 21, Ticket 16: IPv6 Routing Issue 3

Topology Overview (Actual Troubleshooting lab design is for below network design)

u2711 Client Should have IP 10.2.1.3

u2711 EIGRP 100 is running between switch DSW1 & DSW2

u2711 OSPF (Process ID 1) is running between R1, R2, R3, R4

u2711 Network of OSPF is redistributed in EIGRP

u2711 BGP 65001 is configured on R1 with Webserver cloud AS 65002

u2711 HSRP is running between DSW1 & DSW2 Switches

The company has created the test bed shown in the layer 2 and layer 3 topology exhibits. This network consists of four routers, two layer 3 switches and two layer 2 switches.

In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.

DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.

R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the ISPu2019s network. Because the companyu2019s address space is in the private range. R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside (209.65.0.0/24) network.

ASW1 and ASW2 are layer 2 switches.

NTP is enabled on all devices with 209.65.200.226 serving as the master clock source. The client workstations receive their IP address and default gateway via R4u2019s DHCP server.

The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is

running on DSW1 and DSW2.

In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.

DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.

The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the underlying IPv4 OSPF domain. Redistrution is enabled where necessary.

Recently the implementation group has been using the test bed to do a u2018proof-of-conceptu2019 on several implementations. This involved changing the configuration on one or more of the devices. You will be presented with a series of trouble tickets related to issues introduced during these configurations.

Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and solution.

Each ticket has 3 sub questions that need to be answered & topology remains same. Question-1 Fault is found on which device,

Question-2 Fault condition is related to,

Question-3 What exact problem is seen & what needs to be done for solution

=====================================================================



New Questions 6

Which of the following characteristics describe the BPDU Guard feature? (Choose all that apply.)

A. A BPDU Guard port should only be configured on ports with PortFast enabled.

B. BPDU Guard and PortFast should not be enabled on the same port.

C. BPDU Guard is used to ensure that superior BPDUs are not received on a switch port.

D. A BPDU Guard port receiving a BPDU will go into err-disable state.

E. A BPDU Guard port receiving a BPDU will be disabled.

F. BPDU Guard can be enabled on any switch port.

Answer: A,D,E

Explanation:

Option A is, obviously, valid, since BPDUGuard is a enhancement of thePortFast feature. Reference: Spanning Tree PortFast BPDU Guard Enhancementhttp://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a008009482f.shtml



New Questions 7

Which of the following characteristics describe the Root Guard feature? (Choose all that apply.)

A. The port must be put into forwarding state manually after root-inconsistent state has been corrected.

B. A Root Guard port receiving superior BPDU goes into a root-inconsistent state.

C. A Root Guard port receiving inferior BPDU goes into a root-inconsistent state.

D. While the port is in a root-inconsistent state no user data is sent across that port.

E. The port returns to a forwarding state if inferior BPDUs stop.

F. It should be applied to all switch ports.

Answer: B,D

Explanation: Reference: Spanning Tree Protocol Root Guard Enhancementhttp://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a 00800ae96b.shtml



New Questions 8

Which of the following statements regarding documentation would not be considered a helpful step in the troubleshooting process?

A. Use the Cisco Auto Configuration tool.

B. Use the Cisco Rollback feature.

C. Automate documentation.

D. Schedule documentation checks.

E. Use the Cisco Configuration Archive tool.

F. Require documentation prior to a ticket being closed out.

Answer: A



New Questions 9

When troubleshooting an EIGRP connectivity problem, you notice that two connected EIGRP routers are not becoming EIGRP neighbors. A ping between the two routers was successful. What is the next thing that should be checked?

A. Verify that the EIGRP hello and hold timers match exactly.

B. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP peer command.

C. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP traffic command.

D. Verify that EIGRP is enabled for the appropriate networks on the local and neighboring router.

Answer: D



New Questions 10

Which of the following are byproducts of a structured maintenance plan? (Choose all that apply.)

A. Predictable security vulnerabilities

B. Economies of scale

C. Improved expenditure forecasts

D. Increased downtime

E. Predictable equipment obsolescence

F. Consumption of fewer resources

Answer: A,B,C,E,F



New Questions 11

Which of the following management types can be used to deploy appropriate quality- of-service solutions to make the most efficient use of bandwidth?

A. Fault management

B. Accounting management

C. Operations management

D. Performance management

E. Security management

F. Configuration management

Answer: D



100% Regenerate Cisco 300-135 Questions & Answers shared by Dumpscollection, Get HERE: http://www.dumpscollection.net/dumps/300-135/ (New 156 Q&As)