Ultimate Guide: ccnp security sisas 300 208 official cert guide

Our pass rate is high to 98.9% and the similarity percentage between our cisco 300 208 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 208 sisas exam in just one try? I am currently studying for the Cisco ccnp security sisas 300 208 official cert guide pdf exam. Latest Cisco 300 208 sisas Test exam practice questions and answers, Try Cisco 300 208 sisas Brain Dumps First.


The article at Testaimer.com going over http://www.testaimer.com/300-208-test is very comprehensive.

Q31. Changes were made to the ISE server while troubleshooting, and now all wireless certificate authentications are failing. Logs indicate an EAP failure. What is the most likely cause of the problem? 

A. EAP-TLS is not checked in the Allowed Protocols list 

B. Certificate authentication profile is not configured in the Identity Store 

C. MS-CHAPv2-is not checked in the Allowed Protocols list 

D. Default rule denies all traffic 

E. Client root certificate is not included in the Certificate Store 

Answer:


Q32. Which two conditions are valid when configuring ISE for posturing? (Choose two.) 

A. Dictionary 

B. member Of 

C. Profile status 

D. File 

E. Service 

Answer: D,E 


Q33. Which three network access devices allow for static security group tag assignment? (Choose three.) 

A. intrusion prevention system 

B. access layer switch 

C. data center access switch 

D. load balancer 

E. VPN concentrator 

F. wireless LAN controller 

Answer: B,C,E 


Q34. A network administrator must enable which protocol to utilize EAP-Chaining? 

A. EAP-FAST 

B. EAP-TLS 

C. MSCHAPv2 

D. PEAP 

Answer:


Q35. In this simulation, you are task to examine the various authentication events using the ISE GUI. For example, you should see events like Authentication succeeded. Authentication failed and etc... 

Which four statements are correct regarding the event that occurred at 2014-05-07 00:19:07.004? (Choose four.) 

A. The IT_Corp authorization profile were applied. 

B. The it1 user was matched to the IT_Corp authorization policy. 

C. The it1 user supplicant used the PEAP (EAP-MSCHAPv2) authentication method. 

D. The it1 user was authenticated using MAB. 

E. The it1 user was successfully authenticated against AD1 identity store. 

F. The it1 user machine has been profiled as a Microsoft-Workstation. 

G. The it1 user machine has passed all the posture assessement tests. 

Answer: B,C,E,F 

Explanation: 

Here are the details shown for this event: 

Screen Shot 2015-06-23 at 5.27.37 PM 


Q36. Which protocol sends authentication and accounting in different requests? 

A. RADIUS 

B. TACACS+ 

C. EAP-Chaining 

D. PEAP 

E. EAP-TLS 

Answer:


Q37. In this simulation, you are task to examine the various authentication events using the ISE GUI. For example, you should see events like Authentication succeeded. Authentication failed and etc... 

Which three statements are correct regarding the events with the 20 repeat count that occurred at 2014-05-07 00:22:48.748? (Choose three.) 

A. The device was successfully authenticated using MAB. 

B. The device matched the Machine_Corp authorization policy. 

C. The Print Servers authorization profile were applied. 

D. The device was profiled as a Linksys-PrintServer. 

E. The device MAC address is 00:14:BF:70:B5:FB. 

F. The device is connected to the Gi0/1 switch port and the switch IP address is 10.10.2.2. 

Answer: A,D,E 

Explanation: 

Event Details: 

Screen Shot 2015-06-23 at 5.32.43 PM …continued: 

Screen Shot 2015-06-23 at 5.33.24 PM 


Q38. Where would a Cisco ISE administrator define a named ACL to use in an authorization policy? 

A. In the conditions of an authorization rule. 

B. In the attributes of an authorization rule. 

C. In the permissions of an authorization rule. 

D. In an authorization profile associated with an authorization rule. 

Answer:


Q39. What is another term for 802.11i wireless network security? 

A. 802.1x 

B. WEP 

C. TKIP 

D. WPA 

E. WPA2 

Answer:


Q40. Which Cisco ISE 1.x protocol can be used to control admin access to network access devices? 

A. TACACS+ 

B. RADIUS 

C. EAP 

D. Kerberos 

Answer: