How Does Ucertify Cisco 300-365 exam question Work?

Your success in Cisco 300-365 is our sole target and we develop all our 300-365 braindumps in a way that facilitates the attainment of this target. Not only is our 300-365 study material the best you can find, it is also the most detailed and the most updated. 300-365 Practice Exams for Cisco CCNP Wireless 300-365 are written to the highest standards of technical accuracy.


The article at Testaimer.com going over http://www.testaimer.com/300-365-test is very comprehensive.

Q31. On which AP radio or radios is Cisco WGB association supported? 

A. 2.4 GHz only 

B. 2.4 or 5 GHz only 

C. 2.4, 5, or 4.9 GHz 

D. 5 GHz only 

Answer:


Q32. Refer to Exhibit. 

What two items need to be supported on the VoWLAN phones in order to take full advantage of this WLAN configuration? (Choose two.) 

A. APSD 

B. 802.11a 

C. 802.11e 

D. WMM 

E. 802.11r 

F. SIFS 

Answer: C,D 


Q33. A downstream packet containing a DSCP value arrives at the WLC Ethernet interface from the wired source network. The WLC is configured for QoS WLAN 802.1p mapping. How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the respective AP and final wireless client destination? 

A. No outer CAPWAP or inner QoS tagging is applied. 

B. No outer CAPWAP QoS tag is applied, but the original DSCP is maintained inside CAPWAP. 

C. The outer CAPWAP CoS is marked and capped while the inner DSCP maintains the original marking. 

D. The outer CAPWAP DHCP is marked and capped without any inner DSCP value. 

Answer:


Q34. Refer to Exhibit. 

A wireless client is connecting to FlexAPI which is currently working standalone mode. The AAA authentication process is returning the following AVPs: 

Tunnel-Private-Group-ld(81): 15 Tunnel-Medium-Type(65):IEEE-802(6) Tunnel-Type(64): VLAN(13) 

Which three behaviors will the client experience? (Choose three.) 

A. While the AP is in standalone mode, the client will be placed in VLAN 15. 

B. While the AP is in standalone mode, the client will be placed in VLAN 10. 

C. When the AP transitions to connected mode, the client will be de-authenticated. 

D. While the AP is in standalone mode, the client will be placed in VLAN 13. 

E. When the AP is in connected mode, the client will be placed in VLAN 13. 

F. When the AP transitions to connected mode the client will remain associated. 

G. When the AP is in connected mode, the client will be placed in VLAN 15. 

H. When the AP is in connected mode, the client will be placed in VLAN 10. 

Answer: A,D,E 


Q35. What is the default NMSP echo interval between a Mobility Services Engine and Wireless LAN Controller? 

A. 30Seconds 

B. 15 Seconds 

C. 10 Seconds 

D. 60 Seconds 

Answer:


Q36. Which of the following is not a Cisco RF fingerprinting key advantage over Location Tracking? 

A. Uses existing LWAPP-enabled Cisco Unified Networking components. 

B. Proprietary client hardware or software is required. 

C. Better accuracy and precision. 

D. Reduced calibration effort. 

Answer: