Abreast of the times 300-365 Exam Study Guides With New Update Exam Questions

Testking offers free demo for 300-365 exam. "Deploying Cisco Wireless Enterprise Networks", also known as 300-365 exam, is a Cisco Certification. This set of posts, Passing the Cisco 300-365 exam, will help you answer those questions. The 300-365 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300-365 exams and revised by experts!

Q1. A network engineer has installed 802.11ac access points with 80 MHz enabled; however, in the conference rooms, co-channel interference is being noticed. Under which tab in the RF profiles configuration can the engineer find the settings to tune the channel width for a group of APs? 

A. 802.11 


C. High Density 

D. General 


Q2. A network engineer for a college dormitory notices that student devices are filling up the SP-DB and are not allowing the shared wireless printers to be discovered. Which feature can be used to reserve space in the SP-DB for the printers? 



C. Priority MAC 

D. sso 


Q3. A customer called into the support center with a problem ticket that involves wireless clients having to reauthenticate when they are walking around their office. After further investigation, it was discovered that the customer has two controllers in an N+1 deployment. Which action must the engineer take to troubleshoot the issue? 

A. Verify that the wireless controllers are in the same mobility group and that the access points are all on the primary controller. 

B. Under the SSID, make sure that 802.1 Iris configured and running for the clients. 

C. Make sure that the SSID has the authentication set to 802.1x with Cisco Centralized Key Management so the data clients can roam seamlessly. 

D. Verify the access points are spread out between the primary and secondary controller and that the controllers are in the same mobility group. 


Q4. A customer has implemented a wireless network that requires tuning for High Density applications utilizing the RX-SOP feature. They are experiencing a high noise floor (average of -65 dBm) and expect that to decrease significantly. A sampling of radios determine that most Access Points have neighbors on the same channel at a power level of -75 dBm. Which value should the customer use to start tuning RX-SOP? 

A. -60 dBm 

B. -65dBm 

C. -70 dBm 

D. -75 dBm 

E. -80 dBm 


Q5. An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.) 

A. static VLAN on client 


C. AP group 

D. static IP on client 

E. MAC filtering 

F. RF group 

G. AAA override 

Answer: C,G 

Q6. You have set up FlexConnect APs. For which scenario is Fast Roaming supported, providing the WLAN is mapped to the same VLAN and the client is roaming to an AP on the same Cisco WLC? 

A. central switching with PMK (OKC) between different FlexConnect groups 

B. local switching with Cisco Centralized Key Management within the same FlexConnect group 

C. central switching with Cisco Centralized Key Management between different FlexConnect groups 

D. local switching with PMKID within the same FlexConnect group 


Q7. You have just added a new MSE to Prime Infrastructure and want to synchronize the MSE with your 5508 WLC. which is located behind a firewall in a DMZ. You notice that NMSP messages are failing between the two devices. What traffic needs to be allowed on the Firewall to ensure the MSE and WLC can communicate using NMSP? 

A. UDP 16113 

B. TCP 1613 

C. TCP 16113 

D. UDP 1613 


Q8. When a Vocera badge performs a broadcast call in a properly configured VoWLAN using WLC v7.0, which two choices indicate how the QoS is marked? (Choose two.) 

A. Upstream marked as Best Effort. 

B. Upstream marked as ToS CS4. 

C. Upstream marked as DSCP EF. 

D. Downstream marked as DSCP EF. 

E. Downstream marked as Best Effort. 

F. Downstream marked as Silver. 

Answer: C,E 

Q9. Which of the following is not a Cisco RF fingerprinting key advantage over Location Tracking? 

A. Uses existing LWAPP-enabled Cisco Unified Networking components. 

B. Proprietary client hardware or software is required. 

C. Better accuracy and precision. 

D. Reduced calibration effort. 


Q10. Refer to Exhibit. 

What two items need to be supported on the VoWLAN phones in order to take full advantage of this WLAN configuration? (Choose two.) 


B. 802.11a 

C. 802.11e 


E. 802.11r 


Answer: C,D