400-201 pdf(31 to 40) for consumer: Apr 2021 Edition

Our Cisco 400-201 exam demos are usually presented as Pdf and Examination ENGINE. The Pdf files are printable as well as portable; and the Examination ENGINE can be downloadable. Both of which will be obtainable after anyone pay for that Cisco 400-201 products. You are able to carry your tests as well as prepare regarding them with your study or in a class through self-training. The analyze engine can easily create a real test-taking environment for you personally. In a expression, our Cisco 400-201 exam braindumps charge little span of time and a modest amount of money. Guaranteed results are usually waiting for you personally.


The article at Testaimer.com going over http://www.testaimer.com/400-201-test is very comprehensive.

2021 Apr 400-201 free draindumps

Q31. Refer to the exhibit. 

Customer ABC is peering with two service providers for Internet Access In order to prevent the AS100 from becoming a transit AS between ISP_1 and ISP_2 Which BGP configuration must be applied to achieve this goal? 

A. CE1# 

ip as-path access-list 1 permit ^$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.2.2 route-map LOCAL_ONLY in 

CE2# 

ip as-path access-list 1 permit ^$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.1.2 route-map LOCAL-ONLY in 

B. CE1# 

ip as-path access-list 1 permit ^11$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

, router bgp 100 

neighbor 1.1.1.2 route-map LOCAL_ONLY out 

CE2# 

ip as-path acctss-list 1 permit ^22$ 

router-map LOCAL.ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.1.2 routt-map LOCAL_ONLY out 

C. CE1# 

ip as-path access-list 1 permit ^$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.2.2 route-map LOCAL_ONLY out 

CE2# 

ip as-path access-list 1 permit ^$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.1.2 route-map LOCAL_ONLY out 

D. CE1# 

ip as-path access-list 1 permit ^100$ 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.2.2 route-map LOCAL_ONLY out 

CE2# 

ip as-path access-list 1 permit ^100S 

route-map LOCAL_ONLY permit 10 

match as-path 1 

router bgp 100 

neighbor 1.1.1.2 route-map LOCALJDNLY out 

Answer:


Q32. DRAG DROP 

Drag and drop Evolved Packet Core functional entities on the left to the correct description on the right. 

Answer: 


Q33. Refer to the exhibit. After the BGP TCP negotiation between RouterA and RouterB, what will be the value of the keep alive timer and the hold-down timer, respectively? 

A. 3 seconds and 9 seconds 

B. 60 seconds and 180 seconds 

C. 10 seconds and 9 seconds 

D. no value, because BGP negotiation will not be successful 

E. 10 seconds and 10 seconds 

F. 10 seconds and 30 seconds 

G. 3 seconds and 30 seconds 

H. 3 seconds and 10 seconds 

Answer:


Q34. What is the minimum hardware configuration of the multishelf Cisco CRS-1 system? 

A. One route processor (RP) card and one modular services card (MSC) 

B. One distributed route processor (DRP) and one S13 fabric card (SFC) 

C. One line card chassis (LCC) and one fabric card chassis (FCC) 

D. One route processor (RP) and one fabric card chassis (FCC) 

E. One line card chassis (LCC) and one S13 fabric card (SFC) 

Answer:

Explanation: 

1.4. SP high end product 

A minimum of one LCC and one FCC are required to configure a multishelf system. 


Q35. Which two frame types are correct when configuring T3 interfaces? (Choose two.) 

A. M23 

B. G.832 

C. Extended Super Frame 

D. C-bit parity 

E. G.751 

F. Super Frame 

Answer: A,D 

Explanation: http://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-2/interfaces/configuration/guide/hc42crsbook/hc42t3e3.html 


Up to the immediate present 400-201 brain dumps:

Q36. In a PE-CE scenario using OSPF as the routing protocol, a down-bit set can be advertised in which OSPF LSA type? 

A. type 1 LSA 

B. type 2 LSA 

C. type 3 LSA 

D. type 5 LSA 

E. type 7 LSA 

Answer:


Q37. Which technology is a forwarding decision point in a PE router that provides flexibility to make many Layer 2 flow decisions within an interface? 

A. local connect 

B. AToM 

C. VPLS 

D. pseudowire 

E. EFP 

Answer:


Q38. In a routing virtualization concept, which are the two main techniques for creating vitalized router entities as defined by their physical and operational characteristics? (Choose two.) 

A. HVR 

B. SVR 

C. SDR 

D. DRP 

E. VDC 

Answer: A,B 


Q39. What is NETCONF? 

A. It is a standard for installing, manipulating and deleting configuration of network devices. 

B. it is a Cisco proprietary solution to help remove the time, cost and manual steps involved in network element configuration. 

C. It is data modeling language, to help remove the time, cost and manual steps involved in network element configuration. 

D. It is a new recommendation which writes device specific CLI scripts while keeping flexibility in a vendor dependence environment. 

Answer:

Explanation: http://www.tail-f.com/education/what-is-netconf/ 


Q40. A network engineer needs to connect two core switches that use Gigabit Ethernet interfaces in an MPLS backbone and that are separated by a distance of 60 km. Which Cisco GBIC achieves this goal? 

A. Cisco 1000BASE-T GBIC 

B. Cisco 1000BASE-SX GBIC 

C. Cisco 1000BASE-LX/LH GBIC 

D. Cisco 1000BASE-ZX GBIC 

Answer:

Explanation: 

http://www.cisco.com/web/partners/downloads/765/tools/quickreference/gbic.pdf