What tells you about 70 410 exam questions

Our pass rate is high to 98.9% and the similarity percentage between our 70 410 practice exam study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft 70 410 exam exam in just one try? I am currently studying for the Microsoft mcsa 70 410 exam. Latest Microsoft vce 70 410 Test exam practice questions and answers, Try Microsoft 70 410 installing and configuring windows server 2012 r2 Brain Dumps First.

Q161. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed. 

Contoso.com has a server, named ENSUREPASS-SR07, which has four network adapters. Contoso.com has two SR07’s network adapters are connected to the one LAN, local area networks (LANs). Two of ENSUREPASS – while the other two are connected to the other LAN. 

You are required to configure one of the network adapter pairs into a network adapter team. 

Which of the following actions should you take? 

A. You should consider accessing the Group Policy Management Console (GPMC) on ENSUREPASS-SR07. 

B. You should consider accessing the TS Manager console on ENSUREPASS-SR07. 

C. You should consider accessing the Server Manager console on ENSUREPASS-SR07. 

D. You should consider accessing the Remote Desktop Gateway Manager console on ENSUREPASS-SR07. 

Answer:


Q162. - (Topic 2) 

You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed. 

Server1 is connected to two identical print devices. 

The solution must ensure that if one print device fails, the print jobs will print automatically on the other print device. 

What should you do on Server1? 

A. Add two printers and configure the priority of each printer. 

B. Add one printer and configure printer pooling. 

C. Install the Network Load Balancing (NLB) feature, and then add one printer. 

D. Install the Failover Clustering feature, and then add one printer 

Answer:

Explanation: 

A. expedite documents that need to be printed immediately 

B. A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer. When printing to a printer pool, the spooler will send waiting jobs to alternate ports. If the original or alternate ports are not available 

C. NLB for printing is not supported D. Would need 2 nodes A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer. This is useful in a network with a high volume of printing because it decreases the time users wait for their documents. A printing pool also simplifies administration because multiple printers can be managed from the same logical printer on a server. If one device within a pool stops printing, the current document is held at that device. The succeeding documents print to other devices in the pool, while the delayed document waits until the nonfunctioning printer is fixed. Efficient printer pools have the following characteristics: All printers in the pool are the same model. Printer ports can be of the same type or mixed (parallel, serial, and network). It is recommended that all printers be in one location. Because it is impossible to predict which printer will receive the document, keep all printers in a pool in a single location. Otherwise, users might have a hard time finding their printed document. http://technet.microsoft.com/en-us/library/cc757086(v=ws.10).aspx http://technet.microsoft.com/en-us/library/ cc784619(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc958172.aspx You can create a printing pool to automatically distribute print jobs to the next available printer. A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that isidle receives the next document sent to the logical printer. 


Q163. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. 

You have a starter Group Policy object (GPO) named GPO1 that contains more than 100 

settings. 

You need to create a new starter GPO based on the settings in GPO1. 

You must achieve this goal by using the minimum amount of administrative effort. 

What should you do? 

A. Run the New-GPStarterGPO cmdlet and the Copy-GPO cmdlet. 

B. Create a new starter GPO and manually configure the policy settings of the starter GPO. 

C. Right-click GPO1, and then click Back Up. Create a new starter GPO. Right-click the new GPO, and then click Restore from Backup. 

D. Right-click GPO1, and then click Copy. Right-click Starter GPOs, and then click Paste. 

Answer:

Explanation: 

Although GPOs and Starter GPOs can both be copied, and a Starter GPO can be used to create a new GPO (as that is their purpose), an existing GPO cannot be copied to a new Starter GPO (unfortunately). 


Q164. - (Topic 2) 

Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table. 

You need to configure VM4 to track the CPU, memory, and network usage. 

What should you configure? 

A. NUMA topology 

B. Resource control 

C. Resource metering 

D. Virtual Machine Chimney 

E. The VLAN ID 

F. Processor Compatibility 

G. The startup order 

H. Automatic Start Action 

I. Integration Services 

J. Port mirroring K. Single-root I/O virtualization 

Answer:

Explanation: 

Metrics collected for each virtual machine using resource metering: Average CPU usage, measured in megahertz over a period of time. Average physical memory usage, measured in megabytes. Minimum memory usage (lowest amount of physical memory). Maximum memory usage (highest amount of physical memory). Maximum amount of disk space allocated to a virtual machine. Total incoming network traffic, measured in megabytes, for a virtual network adapter. Total outgoing network traffic, measured in megabytes, for a virtual network adapter 

: http://blogs.technet.com/b/meamcs/archive/2012/05/28/hyper-v-resource-metering-in-windows-server-2012-server-8-beta.aspx 


Q165. HOTSPOT - (Topic 1) 

You have a server named Server1 that runs Windows Server 2012 R2. 

You need to switch Server1 to a Server Core installation of Windows Server 2012 R2. 

What command should you run? 

To answer, select the appropriate options in the answer area. 

Answer: 


Q166. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. Subsequent to deploying a Server Core Installation of Windows Server 2012 on a new Contoso.com server, you are instructed to add a graphical user interface (GUI) to the server. 

You want to achieve this goal from the command prompt. Which of the following actions should you take? 

A. You should consider making use of the dism.exe command. 

B. You should consider making use of the dsquery.exe command. 

C. You should consider making use of the dsadd.exe command. 

D. You should consider making use of the dsrm.exe command. 

Answer:

Explanation: 

A. Deployment Image Servicing and Management (DISM) 

B. dsquery Queries the directory by using search criteria that you specify. 

C. dsadd Adds specific types of objects to the directory. 

D. dsrm Deletes an object of a specific type or any general object from the directory. 

The Deployment Image Servicing and Management (DISM) tool replaces the pkgmgr, PEImg, and IntlConfg tools that are being retired in Windows 7. DISM provides a single centralized tool for performing all of the functions of these three tools in a more efficient and standardized way, eliminating the source of many of the frustrations experienced by current users of these tools. Dism /online /enable-feature /featurename:Server-Gui-Mgmt /featurename:Server-Gui-Shell /featurename:ServerCore-FullServer 


Q167. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a member server named Server1. Server1 has the File Server server role installed. 

On Server1, you create a share named Documents. The Documents share will contain the files and folders of all users. 

You need to ensure that when the users connect to Documents, they only see the files to which they have access. 

What should you do? 

A. Enable access-based enumeration. 

B. Configure Dynamic Access Control. 

C. Modify the Share permissions. 

D. Modify the NTFS permissions. 

Answer:

Explanation: 

Access-based Enumeration is a new feature included with Windows Server 2003 Service 

Pack 1. This feature allows users of Windows Server 2003-Based file servers to list only 

the files and folders to which they have access when browsing content on the file server. 

This eliminates user confusion that can be caused when users connect to a file server and 

encounter a large number of files and folders that they cannot access. Access-based 

Enumeration filters the list of available files and folders on a server to include only those 

that the requesting user has access to. This change is important because this allows users 

to see only those files and directories that they have access to and nothing else. This 

mitigates the scenario where unauthorized users might otherwise be able to see the 

contents of a directory even though they don’t have access to it. 

Access-Based Enumeration (ABE) can be enabled at the Share properties through Server 

Manager 

References: 

Exam Ref 70-410: Installing and configuring Windows Server 2012 R2, Chapter 2: 

Configure server roles and features, Objective 2.1: Configure file and share access, p. 75-


Q168. - (Topic 3) 

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has 2 dual-

core processors and 16 GB of RAM. 

You install the Hyper-V server role in Server1. 

You plan to create two virtual machines on Server1. 

You need to ensure that both virtual machines can use up to 8 GB of memory. The solution 

must ensure that both virtual machines can be started simultaneously. 

What should you configure on each virtual machine? 

A. Dynamic Memory 

B. NUMA topology 

C. Memory weight 

D. Resource Control 

Answer:


Q169. - (Topic 3) 

Server1 runs Windows Server 2012 R2 and is installed as an FTP server. Client uses App1 to connect to Server1 for FTP. App1 uses TCP port 21 for control and a dynamic port for data. You have allowed port 21 in firewall. What should you do next in order to allow clients to use App1 to connect to server1 using ftp. 

A. At Server1 allow firewall rule of outbound 

B. At Server1 allow firewall rule of inbound 

C. Netsh advfirewall domainprofile state off 

D. Netsh advfirewall set global StatefulFtp enable 

Answer:

Explanation: 

Set global statefulftp Configures how Windows Firewall with Advanced Security handles FTP traffic that uses an initial connection on one port to request a data connection on a different port. This affects both active and passive FTP. 


Q170. HOTSPOT - (Topic 3) 

Your network contains an Active Directory domain. The domain contains a server named Server28. 

The computer account of Server 28 is located in an organizational unit (OU) named OU1. A Group Policy object (GPO) named Application Restriction Policy is linked to OU1. 

The settings of the GPO are configured as shown in the GPO Settings exhibit. (Click the Exhibit button.) 

The Services console on Server28 is shown in the Services exhibit. (Click the Exhibit 

button.) 

Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point. 

Answer: