70 410 installing and configuring windows server 2012 r2 : Aug 2017 Edition

Master the 70 410 exam questions and answers pdf Installing and Configuring Windows Server 2012 content and be ready for exam day success quickly with this Examcollection 70 410 installing and configuring windows server 2012 r2 study guide. We guarantee it!We make it a reality and give you real microsoft 70 410 exam questions in our Microsoft microsoft 70 410 exam braindumps.Latest 100% VALID Microsoft exam 70 410 pdf Exam Questions Dumps at below page. You can use our Microsoft mcsa 70 410 pdf braindumps and pass your exam.

Q271. - (Topic 3) 

You have a server named Server1 that runs a full installation of Windows Server 2012 R2. 

You need to uninstall the graphical user interface (GUI) on Server1. You must achieve this goal by using the minimum amount of Administrative effort. What should you do? 

A. Reinstall Windows Server 2012 R2 on the server. 

B. From Server Manager, uninstall the User Interfaces and Infrastructure feature. 

C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE 

D. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience. 

Answer:


Q272. DRAG DROP - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1. All servers in the domain run Windows Server 2012 R2. 

You need to create a new volume on File1. 

The new volume must have the following configurations: 

Have the drive letter T 

Have the FAT32 file system 

Be stored on a new virtual hard disk 

In which order should you run the Diskpart commands? 

To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order. 

Answer: 


Q273. - (Topic 3) 

You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. 

You are running a training exercise for junior administrators. You are currently discussing what happens when you run the Remove-NetLbfoTeam Windows PowerShell cmdlet. 

Which of the following describes the results of running this cmdlet? 

A. It removes one or more network adapters from a specified NIC team. 

B. It removes a team interface from a NIC team. 

C. It removes a specified NIC team from the host. 

D. It removes a network adapter member from a switch team. 

Answer:

Explanation: 

Remove-NetLbfoTeam removes the specified NIC team from the host. 

The Remove-NetLbfoTeam cmdlet removes the specified NIC team from the host. This 

cmdlet disconnects all associated team members and providers from the team. You can 

specify the team to remove by using either a team object retrieved by Get-NetLbfoTeam, or 

by specifying a team name. 

You can use Remove-NetLbfoTeam to remove all NIC teams from the server. 

You need administrator privileges to use Remove-NetLbfoTeam. 


Q274. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2. Server1 contains a shared folder named Share1. Share1 contains the home folder of each user. 

All users have the necessary permissions to access only their home folder. 

The users report that when they access Share1, they can see the home folders of all the users. 

You need to ensure that the users see only their home folder when they access Share1. 

What should you do from Server1? 

A. From Windows Explorer, modify the properties of the volume that contains Share1. 

B. From Server Manager, modify the properties of the volume that contains Share1. 

C. From Server Manager, modify the properties of Share1. 

D. From Windows Explorer, modify the properties of Share1. 

Answer:


Q275. - (Topic 3) 

You have a server that runs Windows Server 2012 R2. The server contains the disks configured as shown in the following table. 

You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create? 

A. A mirrored volume on Disk 1 and Disk 4 

B. A storage pool on Disk 2 and Disk 3 

C. A storage pool on Disk 1 and Disk 3 

D. A mirrored volume on Disk 2 and Disk 3 

Answer:


Q276. - (Topic 3) 

Your network contains one Active Directory domain named contoso.com. The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. 

You plan to replace a domain controller named DC1. DC1 has the schema operations master role. 

You need to transfer the schema master role to another domain controller named DC10 before you remove Active Directory from DC1. 

Which tool should you use? 

A. the ntdsutil command 

B. the Set-ADDomain cmdlet 

C. the Install-ADDSDomain cmdlet 

D. the dsadd command 

E. the dsamain command 

F. the dsmgmt command 

G. the net user command 

H. the Set-ADForest cmdlet 

Answer:

Explanation: To transfer the schema master role using the command line: 

Open Command Prompt. 

Type:.ntdsutil 

At the ntdsutil command prompt, type:.roles 

... 

.. .. 

At the fsmo maintenance command prompt, type:.connection At the server connections command prompt, type:.connect to serverDomainController At the server connections command prompt, type:.quit At the fsmo maintenance command prompt, type:.transfer schema master 

Reference: Transfer the schema master role 


Q277. - (Topic 3) 

Catalog Servers. Your domain structure contains one root domain and one child domain. You modify the folder permissions on a file server that is in the child domain. You discover that some Access Control entries start with S-1-5-21 and that no account name is listed. 

You need to list the account names. What should you do? 

A. Move the RID master role in the child domain to a domain controller that holds the Global Catalog. 

B. Modify the schema to enable replication of the friendly names attribute to the Global Catalog. 

C. Move the RID master role in the child domain to a domain controller that does not hold the Global Catalog. 

D. Move the infrastructure master role in the child domain to a domain controller that does not hold the Global Catalog. 

Answer:

Explanation: 

If the IM Flexible Single Master Operation (FSMO) role holder is also a global catalog server, the phantom indexes are never created or updated on that domain controller. (The FSMO is also known as the operations master.) This behavior occurs because a global catalog server contains a partial replica of every object in Active Directory. The IM does not store phantom versions of the foreign objects because it already has a partial replica of the object in the local global catalog. 

For this process to work correctly in a multidomain environment, the infrastructure FSMO role holder cannot be a global catalog server. Be aware that the first domain in the forest holds all five FSMO roles and is also a global catalog. Therefore, you must transfer either role to another computer as soon as another domain controller is installed in the domain if you plan to have multiple domains. 


Q278. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. 

You create a software restriction policy to allow an application named App1 by using a certificate rule. 

You need to prevent the software restriction policy from applying to users that are members of the local Administrators group. 

What should you do? 

A. Modify the rule for App1 

B. Modify the Enforcement Properties 

C. Modify the Security Levels. 

D. Modify the Trusted Publishers Properties 

Answer:


Q279. - (Topic 3) 

A company’s server deployment team needs to introduce many new Windows Server 2012 R2 domain controllers throughout the network into a single Windows Server 2008 R2 domain. The team has chosen to use Windows PowerShell. 

Which Windows PowerShell module includes the command-line options for installing domain controllers? 

A. AD DS Administration cmdlets 

B. AD DS Deployment cmdlets 

C. AD CS Deployment cmdlets 

D. AD CS Administration cmdlets 

Answer:

Explanation: 

First use the Import-Module ADDSDeployment command in PowerShell–it includes the cmdlets needed to add new domain controllers. Then run Install-ADDSDomainController along with the required arguments. Quick Tip: DCPromo.exe has been deprecated but can still be used along with an answer file, and ADPrep.exe runs automatically when needed (but can be run with elevated rights for more control).