Surprising vce 70 410

Cause all that matters here is passing the Microsoft 70 410 dumps pdf exam. Cause all that you need is a high score of braindumps 70 410 Installing and Configuring Windows Server 2012 exam. The only one thing you need to do is downloading Pass4sure vce 70 410 exam study guides now. We will not let you down with our money-back guarantee.

Q21. - (Topic 3) 

A laptop with server 2012 R2 OS, you need to ensure that server 2012 R2 can use wireless network adapter. 

What should you do first? 

A. use server manager to install the Wireless Lan Service Role 

B. use server manager to install the Wireless Network Role 

C. use server manager to install the Wireless Lan Service Feature 

D. use server manager to install the Wireless Network Feature 

Answer:


Q22. - (Topic 2) 

You have a server named Corel that has a Server Core Installation of Windows Server 2012 R2. 

Corel has the Hyper-V server role installed. Corel has two network adapters from different third-party hardware vendors. 

You need to configure network traffic failover to prevent connectivity loss if a network adapter fails. 

What should you use? 

A. New-NetSwitchTeam 

B. Install-Feature 

C. Add-NetSwitchTeamMember 

D. Netsh.exe 

Answer:


Q23. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. 

Contoso.com has a server, named ENSUREPASS-SR13, which is configured as the primary DNS server in the Contoso.com domain. Contoso.com has another server, named ENSUREPASS-SR14, which makes use of ENSUREPASSSR13 for DNS queries. 

You want to make sure that running nslookup.exe from ENSUREPASS-SR14 produces a result that shows the proper name of the default server. 

Which of the following actions should you take? 

A. You should consider creating a reverse lookup zone on ENSUREPASS-SR14. 

B. You should consider creating a forward lookup zone on ENSUREPASS-SR14. 

C. You should consider creating a reverse lookup zone on ENSUREPASS-SR13. 

D. You should consider creating a forward lookup zone on ENSUREPASS-SR13. 

Answer: C

Explanation: 

When you start Nslookup from a command line, the following error message may be displayed: DNS request timed out timeout was x seconds Can’t find server name for address xxx.xxx.xxx.xxx: Timed out Default servers are not available Default Server: UnKnown Address: xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the Internet Protocol (IP) address of the host on which you are attempting to start Nslookup. CAUSE When Nslookup starts, it attempts to resolve the IP address of its host’s DNS server to its fully qualified domain name (FQDN). If the DNS server does not respond or if the DNS server’s reverse lookup zones do not contain a PTR record for the DNS server’s IP address, the error message is displayed. 


Q24. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. 

You create an external virtual switch named Switch1. Switch1 has the following configurations: 

Connection type: External network 

Single-root I/O virtualization (SR-IOV): Enabled 

Ten virtual machines connect to Switch1. 

You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines. 

What should you do? 

A. Remove Switch1 and recreate Switch1 as an internal network. 

B. Change the Connection type of Switch1 to Private network. 

C. Change the Connection type of Switch1 to Internal network. 

D. Remove Switch1 and recreate Switch1 as a private network. 

Answer:

Explanation: 

You cannot change the type of vswitch from external to private when SR-IOV is enabled at vswitch creation ->you need to recreate the vswitch. 


Q25. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed. 

You have received instructions to install the Remote Desktop Services server role on a server, named ENSUREPASS-SR07. You want to achieve this remotely from a server, named ENSUREPASS-SR06. 

Which of the following actions should you take? 

A. You should consider accessing the Server Manager console on ENSUREPASS-SR07. 

B. You should consider accessing the Server Manager console on ENSUREPASS-SR06. 

C. You should consider accessing the TS Manager console on ENSUREPASS-SR07 

D. You should consider accessing the TS Manager console on ENSUREPASS-SR06. 

Answer:


Q26. - (Topic 3) 

Server 1 and Server2 host a load-balanced Application pool named AppPool1. You need to ensure thatAppPool1 uses a group Managed Service Account as its identity. Which 3 actions should you perform? 

A. Install a domain controller that runs Windows Server 2012 R2, Run the New- ADService Accountcmdlet, Modify the settings of AppPool1. 

B. Configure the Security settings of the contoso.com zone. 

C. Add a second legacy network adapter, and then run the Set-VMNetwork Adoptercmdlet. 

D. From Windows Powershell, run Get-DNS ServerDiagnostics. 

Answer:

Explanation: 

For the application pool to use a group Managed Service account as its identity you will have to make sure that there is a domain controller where you can add the account and then modify the application pool accordingly. Thus you should use the New- ADService Account on the domain controller that will create a new Active Directory service account. 


Q27. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. 

On Server1, an administrator creates a virtual machine named VM1. 

A user named User1 is the member of the local Administrators group on Server1. 

User1 attempts to modify the settings of VM1 as shown in the following exhibit. (Click the 

Exhibit button.) 

You need to ensure that User1 can modify the settings of VM1 by running the Set-Vm cmdlet. 

What should you instruct User1 to do? 

A. Import the Hyper-V module. 

B. Install the Integration Services on VM1. 

C. Run Windows PowerShell with elevated privileges. 

D. Modify the membership of the local Hyper-V Administrators group. 

Answer:

Explanation: 

You can only use the PowerShell snap-in to modify the VM settings with the vm cmdlets 

when you are an Administrator. 

Thus best practices dictate that User1 run the PowerShell with elevated privileges. 

Reference: http://technet.microsoft.com/en-us/library/jj713439.aspx 


Q28. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed. 

Contoso.com has a Hyper-V server, named ENSUREPASS-SR13, which hosts multiple virtual machines. 

You have enabled the use of Single-root I/O virtualization. 

Which of the following is TRUE with regards to using Single-root I/O virtualization? (Choose all that apply.) 

A. It maximizes network throughput, while minimizing network latency. 

B. It maximizes network throughput, as well as network latency. 

C. It avoids the virtual switch stack and allows the virtual machine direct access to the actual network switch. 

D. It prevents the virtual machine from accessing the network switch directly. 

Answer: A,C 

Explanation: 

SR-IOV enables network traffic to bypass the software switch layer of the Hyper-V virtualizationstack. Because the VF is assigned to a child partition, the network traffic flows directly between the VF and child partition. As a result, the I/O overhead in the software emulation layer is diminished and achieves network performance that is nearly the same performance as in nonvirtualized environments. 


Q29. HOTSPOT - (Topic 3) 

You have a server named Server1. Server1 runs Windows Server 2012 R2. 

A user named Admin1 is a member of the local Administrators group. 

You need to ensure that Admin1 receives a User Account Control (UAC) prompt when 

attempting to open Windows PowerShell as an administrator. 

Which setting should you modify from the Local Group Policy Editor? 

To answer, select the appropriate setting in the answer area. 

Answer: 


Q30. - (Topic 3) 

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. Subsequent to deploying a Server Core Installation of Windows Server 2012 on a new Contoso.com server, you are instructed to add a graphical user interface (GUI) to the server. 

You want to achieve this goal from the command prompt. Which of the following actions should you take? 

A. You should consider making use of the dism.exe command. 

B. You should consider making use of the dsquery.exe command. 

C. You should consider making use of the dsadd.exe command. 

D. You should consider making use of the dsrm.exe command. 

Answer:

Explanation: 

A. Deployment Image Servicing and Management (DISM) 

B. dsquery Queries the directory by using search criteria that you specify. 

C. dsadd Adds specific types of objects to the directory. 

D. dsrm Deletes an object of a specific type or any general object from the directory. 

The Deployment Image Servicing and Management (DISM) tool replaces the pkgmgr, PEImg, and IntlConfg tools that are being retired in Windows 7. DISM provides a single centralized tool for performing all of the functions of these three tools in a more efficient and standardized way, eliminating the source of many of the frustrations experienced by current users of these tools. Dism /online /enable-feature /featurename:Server-Gui-Mgmt /featurename:Server-Gui-Shell /featurename:ServerCore-FullServer